IO-Link HubUR-DS Series
Unit that converts 1 CH of IO-Link ports in IO-Link
Master to digital and analog I/O
- Expandable I/O up to 256 (16 x 16) points by connecting to IO-Link Master
- Digital input is Sink(NPN) / Source(PNP), all terminals are switched at once
- Digital output is Sink(NPN) / Source(PNP), each pin individually switchable (our original)
NEW MODELS
IO-Link Hub, Analog I/O
UR-DS4AD (4-input)
UR-DS4DA (4-output)
Specifications
Model Specifications IO-Link Hub, Digital I/O
Model | UR-DS16D | UR-DS16T | UR-DS8D8T | ||
---|---|---|---|---|---|
Communication interface | IO-Link (Operates as a device) |
IO-Link (Operates as a device) |
IO-Link (Operates as a device) |
||
Number of process input data byte | 2 bytes | 2 bytes | 2 bytes | ||
Number of process output data byte | 1 byte | 4 bytes | 3 bytes | ||
Minimum cycle time | 0.4 ms | 0.6 ms | 0.5 ms | ||
IO-Link revision | 1.1 | 1.1 | 1.1 | ||
Communication speed | COM3 (230.4 kbps) | COM3 (230.4 kbps) | COM3 (230.4 kbps) | ||
Power supply for communication functions | Power supply for IO-Link | Output power supply | Power supply for IO-Link | ||
Input Specifications | |||||
Number of input points | 16 points | - | 8 points | ||
Input related | Batch source(PNP) / sink(NPN) input switching method (default: switch by process output data) | Batch source(PNP) / sink(NPN) input switching method (default: switch by process output data) | |||
Withstand voltage | From I/O terminal batch to IO-Link batch 500 VAC for 1 minute |
From I/O terminal batch to IO-Link batch 500 VAC for 1 minute |
|||
Insulation resistance | From I/O terminal batch to IO-Link batch 500 VDC 10 M ohm or more with an insulation resistance tester |
From I/O terminal batch to IO-Link batch 500 VDC 10 M ohm or more with an insulation resistance tester |
|||
Input / Output common | 16 points common | 8 points common | |||
Rated input voltage | 24 VDC Ripple (P-P) incl. 5 %. | 24 VDC Ripple (P-P) incl. 5 %. | |||
Rated input current (typical) | 4.9 mA | 4.9 mA | |||
Insulation method | Photocoupler Isolation | Photocoupler Isolation | |||
Maximum number of simultaneous input points | 100 % simultaneous ON | 100 % simultaneous ON | |||
Voltage and current at ON | 15 VDC or higher / 3.0 mA or higher | 15 VDC or higher / 3.0 mA or higher | |||
Voltage and current at OFF | 8 VDC or less / 1.5 or less | 8 VDC or less / 1.5 or less | |||
Input resistance | 4.7 k ohm | 4.7 k ohm | |||
Input response time | 0 to 200 ms (1ms unit, default: 10 ms) |
0 to 200 ms (1ms unit, default: 10 ms) |
|||
Output Specifications | Standard output | High current output | Standard output | High current output | |
Number of output points | - | 16 points | 8 points | ||
High current output function | Supported by output C to F source(PNP) | Supported by output C to F source(PNP) | |||
Rated load voltage | 12 VDC/24 VDC (Allowable voltage range 10.2 to 28.8 VDC) |
12 VDC/24 VDC (Allowable voltage range 10.2 to 28.8 VDC) |
|||
Maximum output load current | 0.5 A per 1 point |
4 A per 1 point |
0.5 A per 1 point |
4 A per 1 point | |
Maximum total output load current | 12 A | 12 A | |||
Maximum inrush current | 0.6 A | 6 A | 0.6 A | 6 A | |
Output residual voltage at ON | 1.2 V or less | 0.4 V or less | 1.2 V or less | 0.4 V or less | |
OFF output leakage current | 0.1 mA or less | 0.1 mA or less | |||
Output response time | 0.2 ms or less (OFF to ON) 1.5 ms or less (ON to OFF) |
0.2 ms or less (OFF to ON) 1.5 ms or less (ON to OFF) |
|||
Surge suppressor | Zener diode | Zener diode | |||
I/O power supply voltage | 12 VDC/24 VDC (Allowable voltage range 10.2 to 28.8 VDC) |
12 VDC/24 VDC (Allowable voltage range 10.2 to 28.8 VDC) |
|||
I/O power supply current consumption | 55 mA max (at 24 VDC) | 55 mA max (at 24 VDC) | |||
Output related | Source(PNP) / Sink(NPN) switching for each output individually |
Source(PNP) / Sink(NPN) switching for each output individually |
|||
Output reverse voltage protection | Protected | Unprotected | Protected | Unprotected | |
Common (output) | 16 points individually switchable common | 8 points individually switchable common |
Model Specifications IO-Link Hub, Analog I/O
Model | UR-DS4AD | UR-DS4DA |
---|---|---|
Communication interface | IO-Link (Operates as a device) | IO-Link (Operates as a device) |
Number of process input data byte | 8 bytes | 8 bytes |
Number of process output data byte | 1 byte | 1 byte |
Minimum cycle time | 0.7 ms | 0.7 ms |
IO-Link revision | 1.1 | 1.1 |
Communication speed | COM3 (230.4 kbps) | COM3 (230.4 kbps) |
Power supply for communication functions | Power supply for IO-Link | Power supply for IO-Link |
Input Specifications | ||
Number of input chanels | 4 CH | - |
Input related | Voltage (0 to 10 V, -10 to 10 V, 0 to 5 V, 1 to 5 V) / Crrent (0 to 20 mA, 4 to 20 mA) Input switching method (default: switched by process output data) |
|
Withstand voltage | 500 VAC for one minute between analog input batch and IO-Link batch | |
Insulation resistance | 10 M ohm or higher between analog input batch and IO-Link batch at 500 VDC | |
Interchannel isolation | None (common) | |
Max. input voltage | ±11 V | |
Max. input current | 24 mA | |
Insulation method | Photocoupler Isolation | |
Voltage input impedance | 250.5 k ohm | |
Current input impedance | 246 ohm | |
Voltage Accuracy | ±0.30 % of F.S. (ambient temperature at 25 °C )*1 Temperature coefficient (typical example): ±80 ppm/°C (0.008 %/°C) |
|
Current Accuracy | ±0.30 % of F.S. (ambient temperature at 25 °C ) Temperature coefficient (typical example): ±110 ppm/°C (0.011 %/°C) |
|
Input resolution | 16 bit | |
Output Specifications | ||
Number of output chanels | - | 4 CH |
Output related | Voltage (0 to 10 V, -10 to 10 V, 0 to 5 V) / Crrent (0 to 20 mA) Output switching method (default: switched by process output data) |
|
Withstand voltage | 500 VAC for one minute between I/O terminal batch and IO-Link batch | |
Insulation resistance | 10 M ohm or higher between all I/O terminals and IO-Link terminals at 500 VDC | |
Inter-channel isolation | None (common) | |
Max. output voltage | ±11 V | |
Max. output current | 24 mA | |
Insulation method | Photocoupler Isolation | |
Voltage output equivalent impedance | 0.3 ohm | |
Voltage Accuracy | ±0.2 % of F.S. (ambient temperature at 25 °C)*1 temperature coefficient (typical example): ±80 ppm/°C (0.008 %/°C) |
|
Current Accuracy | ±0.2 % of F.S. (ambient temperature at 25 °C) temperature coefficient (typical example): ±10 ppm/°C (0.001 %/°C) |
|
Output resolution | 16 bits |
*1. Accuracy when input type is set to 0 to 10 V or -10 to 10 V.
Full scale is calculated as 10 V even when 0 to 5 V or 1 to 5 V is set.
IO-Link Hub General Specifications
Item | Specifications | |
---|---|---|
Power supply voltage | 24 VDC ±15 % (SELV and LIM power supplies or UL1310 Class 2 power supplies)*1 |
|
Current consumption | 50 mA max. (for 24 VDC*2) | |
Operating temp. | 0 to +55 °C (no freezing) | |
Operating humidity | 5 to 95 % RH (no condensation) | |
Storage temp. | -25 to +75 °C (no freezing) | |
Storage humidity | 5 to 95 % RH (no condensation) | |
Vibration resistance | IEC 61131-2 compliant | |
Shock resistance | IEC 61131-2 compliant | |
Atmosphere | No corrosive gas | |
Operating altitude | 0 to 2000 m | |
Installation location | Indoor use | |
Degree of protection | IP20 (Not UL Certified) | |
Overvoltage category | II or less | |
Pollution degree | 2 or less | |
Device class | Class Ⅰ | |
Applicable regulations | EMC | EMC Directive (2014/30/EU) |
Environment | RoHS Directive (2011/65/EU), China RoHS (MIIT Order No.32) | |
Applicable standard | EN 61131-2*3 | |
NRTL certification | Planned | |
Company standards | Noise resistance: Feilen Level 3 cleared | |
Compatible DIN rail | TH35-7.5Fe, TH35-7.5Al | |
Compatible wire | Power terminal block: AWG 24 to 12 I/O terminal block: AWG 28 to 16 |
|
Material | Housing: PC, Keys and DIN rail mounting hook: POM,Terminal block: PA | |
Weight | Approx. 115 g*4 (including terminal blocks, when not wired) | |
Included accessories | Instruction manual, 3 x I/O terminal blocks*5, 1 x Power terminal block |
*1. Use a Class 2 power supply or a power supply compliantwith SELV (Safety Extra-Low Voltage) circuit and LIM (LimitedEnergy Circuit) circuit standards.
*2. UR-DS4DA not include analog output
*3. Zone A for UR-DS4AD/4DA
*4. UR-DS4AD weighs approx. 105 g, UR-DS4DA weighs approx. 95 g
*5. UR-DS4AD 2 x I/O terminal blocks, UR-DS4DA 1 x I/O terminal blocks