Lighting Monitoring and Illumination Check SensorMDF Series

DOWNLOAD

Automatic measurement of continuous lighting and
ON/OFF lighting control using an internal trigger

  • Clear maintenance timing of lighting
  • Reduced wiring with the possibility to link up to 8 devices
    (inter-connection types)
MDF Series

Adaptive light source

・Compatible with white, blue, green, red, and infrared LED light sources (Receivable wavelength range: 400 to 1000 nm)
・ Effective for infrared light detection incapable of confirmation through visual inspection
・ Also compatible with fluorescent lamps and halogen lighting

  • Compatible with various light emission modes

    Automatic measurement of continuous lighting, pulse lighting (PWM), and ON/OFF lighting control through the built-in trigger Acceptability determination for sudden non-lighting with synchronous input from an external input line

  • Settings configurable to match lighting brightness

    Manual gain (5-level switching)

  • Manual configuration of upper/lower limits

    Fine-tune upper and lower limit values even after teaching

  • 3 teaching modes

    p>
  • Zone teaching

    Automatic measurement of the internal upper and lower limit settings (default: 10%) is done through teaching of the currently received light amount.

  • Lower limit teaching

    The lighting amount is dimmed to the default value and then the lower limit, and each value is used as the individual setting for teaching.

  • Upper/lower limit teaching

    The lighting amount is dimmed to the default value, the upper limit, and then the lower limit, and each value is used as the individual setting for teaching.

  • External teaching input

    Teach externally using a signal to the external input Re-teach from the operation panel using embedded devices (Synchronous mode: only with Auto/OFF)

  • Flexible fiber

    No changes to measured values even when the fiber is bent Bending radius: 2 mm, Receiving angle: ±30°

  • Manage lighting brightness using numerical values

  • Up to 8 units for less wiring

    Reduced wiring
    Up to 8 units of inter-connection type can be connected.
    Wiring for slave units only requires an output line, so wiring work can be reduced to 1/2 or more.

Equipped with timer function

Configurable from 1 to 9999 ms at 1 ms intervals
The time setting for the timer is configurable. Choose from 3 modes: Off delay, On delay, or One-shot.