High-accuracy Laser SensorsBGS-HL/BGS-HDL Series
High resolution BGS laser sensor
- Minimum detectable height difference = 0.08 mm (BGS-HL05☐☐/-HDL05☐☐)
- Built-in controller and 4-digit display
- Stable detection regardless object color
Lineup
| Type | Sensing distance | Repeatability | Laser class | Line up | Line up | |
|---|---|---|---|---|---|---|
| Aluminum housing | SUS housing | |||||
 |
 |
0.01mm | (IEC/JIS/FDA※) Class1 |
1 | BGS-HL05T | BGS-HLM05T |
| 2 | BGS-HDL05T | − | ||||
 |
0.1mm | 1 | BGS-HL25T | BGS-HLM25T | ||
| (IEC/JIS/FDA※) Class2 |
2 | BGS-HDL25T2 | − | |||
| 1 | BGS-HL25T2 | BGS-HLM25T2 | ||||
 |
 |
0.01mm | (IEC/JIS/FDA※) Class1 |
1 | BGS-HL05TC | BGS-HLM05TC |
 |
0.1mm | BGS-HL25TC | BGS-HLM25TC | |||
| (IEC/JIS/FDA※) Class2 |
BGS-HL25TC2 | BGS-HLM25TC2 | ||||
 |
|
0.01mm | (IEC/JIS/FDA※) Class1 |
2 | BGS-HDL05TM12 | − |
 |
0.1mm | (IEC/JIS/FDA※) Class2 |
BGS-HDL25TM122 | − | ||
※ These products are Classified as CLASS 1 or CLASS 2 by IEC 60825-1 according to Laser Notice No.50, FDA Guidance Document.
Specifications
| Model | Output type | Case | 1 output type | 2 output type | ||
|---|---|---|---|---|---|---|
| Sensing distance | 20 to 50 mm (display: 0.00～30.00 ※1 ) |
50 to 250 mm (display: 0.0～200.0 ※1 ) |
20 to 50 mm (display: 20.00～50.00) |
50 to 250 mm (display: 50.0～250.0) |
||
| Cable type | Aluminum | BGS-HL05T | BGS-HL25T BGS-HL25T2 |
BGS-HDL05T | BGS-HDL25T2 | |
| SUS | BGS-HLM05T | BGS-HLM25T BGS-HLM25T2 |
− | − | ||
| M8 Connector type | Aluminum | BGS-HL05TC | BGS-HL25TC BGS-HL25TC2 |
− | − | |
| SUS | BGS-HLM05TC | BGS-HLM25TC BGS-HLM25TC2 |
− | − | ||
| M12 Connector type | Aluminum | − | − | BGS-HDL05TM12 | BGS-HDL25TM122 | |
| Repeatability | 0.01mm (display: 0.01) | 0.1mm (display: 0.1※2) | 0.01mm (display: 0.01) | 0.1mm (display: 0.1※2) | ||
| Minimum detectable height difference※3 | 0.08mm | 0.8mm | 0.08mm | 0.8mm | ||
| Temperature drift (typical value) | ±0.04% / ℃ F.S. | ±0.08% / ℃ F.S. | ±0.04% / ℃ F.S. | ±0.08% / ℃ F.S. | ||
| Light source | Red laser diode (wavelength 655nm) | |||||
| Output: 390μW Max. | Output: 1mW Max. | Output: 390μW Max. | Output: 1mW Max. | |||
| Spot size※4 | ø0.8mm | ø1mm | ø0.8mm | ø1mm | ||
| Response time※5 | 1.5ms Min. | |||||
| Hysteresis※6 | 0 to 22.49mm Adjustable | 0 to 149.9mm Adjustable | 0 to 22.49mm Adjustable | 0 to 149.9mm Adjustable | ||
| Distance adjustment | Teaching / Manual (Selectable from: 1 point / 2 point / Zone) |
Teaching / Manual | ||||
| Indicator | Laser indicator: Green / Output indicator: Orange / Mode indicator: Red |
Laser indicator: Green / Output 1, 2 indicator: Orange |
||||
| Digital display | 7-segment 4-digit LED display | |||||
| External input | Selectable from: Laser OFF, Teaching, Sample & Hold, One shot |
Selectable from: Laser OFF, Laser ON, Teaching, Sample & Hold, One shot |
||||
| Control output | Open collector (NPN / PNP selectable), 100mA Max. / DC24V (Residual voltage 1.8 V Max.) |
Open collector (NPN / PNP selectable), 50mA Max./DC24V (Residual voltage 1.8 V Max.) |
||||
| Operation mode | Selectable by setting from: Light ON / Dark ON | Selectable by setting from: Light ON / Dark ON/Zone/FGS | ||||
| Timer | Selectable from: OFF/On delay / Off delay / One shot (0 to 9999ms, 1ms step) | |||||
| Power supply | DC12～24V including 10% ripple (p-p) | |||||
| Current consumption※7 | 40mA max. (at 24V DC) | |||||
| Connection type | Cable type: 2m, ø4.5mm, M8 Connector type: 4pin |
Cable type: 2m, ø4.5mm M12 Connector type: 5pin with 300mm cable |
||||
| Applicable regulations |
EMC | 2014 / 30 / EU | ||||
| RoHS | 2011 / 65 / EU,MIIT Order No.32 | |||||
| Safety | 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No.50 | |||||
| Applicable standards | EN 60947-5-2:2007 / A1:2012 IEC 60825-1:2007 | |||||
| Ambient Temp./Humid. | -10 ～ +50℃ / 35 ~ 85% RH (no condensation) |
-10 to +45℃ / 35 to 85% RH (no condensation) |
||||
| Ambient Temp. / Humid. | -10 to 50℃ / 35 to 85% RH without freezing or condensation | |||||
| Storage Temp. / Humid. | -20 to 60℃ / 35 to 85% RH | |||||
| Ambient illuminance | Incandescent lamp: 5,000 lx max. | |||||
| Vibration resistance | 10 to 55Hz, Double amplitude 1.5mm, X,Y,Z for 2 Hours | |||||
| Shock resistance | 500m/s2(approx. 50G) X,Y,Z 3 times each | |||||
| Protection circuit | Reverse connection protection, Over current protection | |||||
| Degree of protection | IP67 | |||||
| Material | Case : ＜Alminum type＞ Aluminum / ＜SUS type＞ SUS, Front lens: PPSU, Display: PET, Cable: Oil resistant PVC | |||||
| Weight | Cable type: Approx. 90g, M8 Connector type: Approx. 30g | Cable type: Approx. 100g, M12 Connector type: Approx. 60g | ||||
| Included accessories | Mounting bracket: BEF-OD1-B (for cable type) / BEF-OD1-A (for connector type), M3 screw * 2pieces | |||||
The specifications are based on the condition unless otherwise designated: Ambient temperature: 24℃ , Supply voltage: 24VDC, Sampling period: 500μs,
Averaging: 512, Measuring distance: Center of the range, Testing object: White ceramic
※1 When “shift function” is ON, display shows 0 at the teaching position.
The number on the display can be as follows.
-7.50~37.5 (BGS-HL05**), -50.0~250.0 (BGS-HL25**)
※2 Sampling period : 1000μs
※3 Hysteresis setting : 0.02mm (BGS-H(D)L05**), 0.2mm (BGS-H(D)L25**)
※4 Defined with center strength 1/e2(13.5%) at the center.
There may be leak light
other than the specified spot size. The sensor may be affected when there is a
highly reflective object close to the detection area.
※5 Default value: 1.5~7ms (BGS-H(D)L05**), 3~14ms (BGS-H(D)L25**)
※6 Default value: 0.15mm (BGS-H(D)L05**), 1mm (BGS-H(D)L25**)
※7 Except output current of control output