Standard-sized Built-in Amplifier SensorsZ4 Series
Industry standard sensors with IO-Link support
- Industry standard-sized amplifier built-in sensors
- IO-Link support: Connectable to various field networks via IO-Link Master
- Enhanced ambient illuminance resistance
NEW MODELS
Wide-angle diffuse-reflective types added to the lineup
Specifications
| Type | Through-beam | Retro-reflective | Diffuse-reflective | Limited diffuse-reflective | Wide-angle diffuse-reflective | ||
|---|---|---|---|---|---|---|---|
| Model | NPN | Cable | Z4T-2500N | Z4R-400N | Z4D-100N | Z4D-L09N | Z4D-W20N |
| Connector | Z4T-2500CN4 | Z4R-400CN4 | Z4D-100CN4 | Z4D-L09CN4 | - | ||
| PNP | Cable | Z4T-2500P | Z4R-400P | Z4D-100P | Z4D-L09P | Z4D-W20P | |
| Connector | Z4T-2500CP4 | Z4R-400CP4 | Z4D-100CP4 | Z4D-L09CP4 | - | ||
| Sensing distance | 25 m | 0 ... 1 m*2 | 10 ... 90 m*3 | 1 ... 200 m*4 | |||
| Light source | 4-element red LED, Wavelength: 632 nm | ||||||
| Spot size | Approx. ø1,800 mm at 25 m |
Approx. ø280 mm at 4 m |
Approx. ø75 mm at 1 m |
Approx. ø8 mm at 90 mm |
Approx. □45 ㎜ at 50 ㎜ |
||
| Response time | Max. 500 μs | Max. 550 μs | |||||
| Hysteresis | - | - | Max. 20 % | Max. 10 % | Max. 20 % | ||
| Sensitivity adjustment | 1-turn potentiometer | ||||||
| Indicators | Output indicator (orange LED), Stability indicator (green LED) (no indicator equipped on through-beam type emitter) |
||||||
| Control output | NPN/PNP Open collector, Max. 100 mA / 30 VDC, Residual voltage Max. 1.8 V |
||||||
| Output mode | Light ON, Dark ON selectable by switch | ||||||
| IO-Link specification | Ver. 1.1, Baud rate: COM3 (230.4 kbps), Number of process input data bytes: 2 bytes, Minimum cycle time: 0.5 ms |
||||||
| Connection | Cable type: 2 m long, ø3.8 mm (Minimum bending radius: Cable diameter x 4 (When fixed in place)) Connector type: M8 4-pin |
||||||
| Rating | Supply voltage | IO-Link mode: 18 to 30 VDC, SIO mode: 10 to 30 VDC including 10 % ripple (p-p) |
|||||
| Current consumption*5 |
Emitter: Max. 14 mA Receiver: Max. 20 mA |
Max. 20 mA | |||||
| Applicable regulations |
EMC | EMC directive (2014/30/EU) | |||||
| Environment | RoHS directive (2011/65/EU), China RoHS (MIIT Order No. 32) | ||||||
| Applicable standards | EN 60947-5-2 | ||||||
| Company standards | Noise resistance: Feilen Level 3 cleared | ||||||
| NRTL Certification*6 | UL Recognized Components, Proximity Switch Certified for US and Canada |
||||||
| Environmental resistance |
Ambient temperature/humidity | -25 ... 55℃/35 ... 85 % RH (No condensation or freezing) | |||||
| Storage temperature/humidity | -40 ... 70℃/35 ... 95 % RH (No condensation or freezing) | ||||||
| Ambient illuminance | Sunlight: 50,000 lx Max. , Incandescent lamp: 5,000 lx Max. | ||||||
| Vibration resistance | 10 ... 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y and Z directions |
||||||
| Shock resistance | Approx. 100 G (1000 m/s2), 3 times in each of the X, Y and Z directions | ||||||
| Degree of protection | IP67 (IEC 60529) | ||||||
| Material | Housing: ABS, Front cover: PMMA | ||||||
| Weight | Emitter; Cable type: Approx. 50 g, Approx. 8 g Receiver; Cable type: Approx. 55 g, Connector type: Approx. 10 g |
Cable type: Approx. 55 g, Connector type: Approx. 10 g |
|||||
| Included items | Instruction manual | ||||||
*1. Reflector V-61
*2. White paper: 200 x 200 mm
*3. White paper: 100 x 100 mm
*4. White paper: 300 x 300 mm
*5. Not including control output load current.
*6. Under UL certification, the product must be used with a supply voltage of 24 VDC, current consumption of 40 mA, and an ambient temperature up to 40℃
● Specifications are subject to change without prior notice. Thank you for your understanding.
