Low Cost / Small TypeZ3 Series
Industry standard sensor
- Longest sensing distance in class at 25 m*
- Signifi cantly reduced dead zone
- Indicators visible from any angle
*Red LED type, with through-beam type
Lineup
| Type | Appearance | Sensing range | Model (M8 Connector type) | |
|---|---|---|---|---|
| NPN type | PNP type | |||
| Through-beam |  |
 |
Z3T-2500N
(Z3T-2500CN4) |
Z3T-2500P
(Z3T-2500CP4) |
| Retro-reflective |  |
 |
Z3R-400N
(Z3R-400CN4) |
Z3R-400P
(Z3R-400CP4) |
| Diffuse-reflective |  |
 |
Z3D-100N (Z3D-100CN4) |
Z3D-100P (Z3D-100CP4) |
| Limited diffuse refl ective |
 |
 |
Z3D-L09N
(Z3D-L09CN4) |
Z3D-L09P
(Z3D-L09CP4) |
| Wide angle diffuse refl ective |
|
 |
Z3D-W20N
(Z3D-W20CN4) |
Z3D-W20P
(Z3D-W20CP4) |
| Transparent object detection |
 |
 |
Z3R-Q200N (Z3R-Q200CN4) |
Z3R-Q200P (Z3R-Q200CP4) |
•A mounting bracket is not included. If necessary, please purchase separately.
•A reflector is not included with the retro-reflective type. Please purchase an optional reflector separately.
•For the connector type, please purchase an optional connector cable separately.
•For the sensor head for amplifier separate type
Specifications
| Type | Through-beam type |
Retroreflective type |
Diffusereflective type |
Limited diffuse reflective type |
Wide angle diffuse reflective type |
||
|---|---|---|---|---|---|---|---|
| Model | NPN | Cable type | Z3T-2500N | Z3R-400N | Z3D-100N | Z3D-L09N | Z3D-W20N |
| Connector type | Z3T-2500CN4 | Z3R-400CN4 | Z3D-100CN4 | Z3D-L09CN4 | Z3D-W20CN4 | ||
| PNP | Cable type | Z3T-2500P | Z3R-400P | Z3D-100P | Z3D-L09P | Z3D-W20P | |
| Connector type | |||||||
| Sensing distance | 25 m | 0.01 to 4 m*1 | 0 to 1 m*2 | 10 to 90 mm*3 | 1 to 200 mm*4 | ||
| Light source | 4 element red LED, wavelength 632 nm | ||||||
| Spot size | Approx. ø1800 mm (at distance of 25 m) |
Approx. ø280 mm (at distance of 4 m) |
Approx. ø75 mm (at distance of 1 m) |
Approx. ø8 mm (at distance of 90 mm) |
Approx. □45 mm (at distance of 50 mm) |
||
| Response time | 500 μs or less | ||||||
| Hysteresis | - | - | 20% Max. | 10% Max. | 20% Max. | ||
| Distance adjustment | 1-turn potentiometer | ||||||
| Indicators |
Output indicator: orange LED, Stability indicator: green LED (no indicator equipped on through-beam type emitter) |
||||||
| Control output | NPN/PNP type Open collector Max. 100 mA/30 VDC | ||||||
| Output mode | Light ON / Dark ON selection switch | ||||||
| Connection type | Cable type: Cable length: 2 m ø3.8 mm / Connector type: M8, 4-pin | ||||||
| Rating | Supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | |||||
| Current consumption | Emitter: 20 mA or less Receiver: 15 mA or less |
20 mA or less | 25 mA or less | 20 mA or less | 20 mA or less | ||
| Applicable regulations | EMC directive (2004/108/EC) | ||||||
| Applicable standards | EN 60947-5-2 | ||||||
| Company standards | Noise resistance: Feilen Level 3 cleared | ||||||
| Environmental resistance |
Ambient temperature/humidity | -25 to +55℃ (no freezing) / 35 to 85% RH (no condensation) | |||||
| Ambient illuminance | Sunlight: 10,000 lx Incandescent lamp: 3,000 lx | ||||||
| Vibration resistance |
10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions |
||||||
| Shock resistance | Approx. 100 G (1000 m/s2); 3 times in each of the X, Y, and Z directions | ||||||
| Degree of protection | IP67 | ||||||
| Material | Housing: ABS, Front cover: PMMA | ||||||
| Weight without cable | Approx. 10 g | ||||||
| Included accessories | Instruction manual | ||||||
*1. With the V-61 reflector
*2. Using a 200 × 200 mm white sheet of paper.
*3. Using a 100 × 100 mm white sheet of paper.
*4. Using a 300 × 300 mm white sheet of paper.
•Specifications are subject to change without prior notice for product improvement purposes.