Heat-resistant up to 150°C (302°F) (with use of optional accessories)
Built-in easy-to-configure digital display
Options/Accessories
Air purge/water-cooling jacket BS-WP1
Compatible models:BS-30T / BS-05T
Attaching an air purge/water-cooling jacket to the sensor head provides greatly improved environmental resistance.
・Instrumentation air or coolant is required.
・There is no need for sensor head fixture NB-SH30A when using BS-WP1.
Sensor head fixture NB-SH30A
Compatible models:BS-30T / BS-05T
This base is used to fix cylindricaltype sensor heads.
It is a convenient accessory for installation.
・Cannot be used in combination with BS-WP1.
Sensor head fixture NB-SH40A
Compatible models:BS-02T
This base is used to fix cylindrical-type sensor heads.
It is a convenient accessory for installation.
Sensor-to-amplifier extension cable BS-EC8
Connecting the optional BS-EC8 cable (8 m) to the standard connector cable (2 m) between the sensor and the amplifier provides up to 10 m of extension.
Both standard and optional cables can handle temperatures up to 150°C (302°F).
Black tape for glossy objects HB-250
When attached to the surface of an object with unknown emissivity or a glossy object, this tape provides an emissivity of 0.95, enabling accurate non-contact temperature measurement.
When using the tape, set the emissivity to ε = 0.95. The tape is built with material resistant to heat up to 250°C (482°F).
Total area: 60 mm × 2000 mm
Air purge/water-cooling jacket BS-WP1
Piping example
Specifications
Air-cooled
Air is blown onto the lens of the surface during cooling to prevent the adhesion of dust.
Ambient temperature
Up to 80°C (176°F)
Air flow rate
50 to 150 Nℓ/min.
Air temperature
20°C (68°F)
Air pressure
0.2 Mpa (2 kgf/ cm2) or less
(limited to instrumentation air)
Water-cooled
Used for cooling only. Use in combination with air cooling can cause scattering of dust.