Laser Displacement SensorsCD2H Series

DOWNLOAD

Best-in-class*, All-in-one Middle-range Sensors

  • Highest-in-class* Repeat Accuracy: 0.25 μm (CD2H-30□/CD2H-50□)
  • Fastest-in-class* Sampling Period: 133.3 μs
  • Measurement in a long distance up to 1,200 mm
  • Received light waveform can be displayed on OLED Display.

  • NEW MODELS

    Added six new RS-485 models

    • *Among laser displacement sensors with the repeat accuracy of 1 μm
    (Investigated by OPTEX FA in November 2021)

CD2H Series

I/O Circuit Diagrams

IO-Link/analog output Type

  • NPN setting*1

    *1. When using NPN settings for an IO-Link connection, use OPTEX FA’s IO-Link Master UR Series or IO-Link Master with sink support.
    *2. When used as control output DO1
    *3. When used as control output DO2
    *4. When used as analog output AO

  • PNP setting

    *1. When used as control output DO1
    *2. When used as control output DO2
    *3. When used as analog output AO

  • Push-pull setting

    *1. When used as control output DO1 with NPN connection
    *2. When used as control output DO2 with NPN connection
    *3. When used as control output DO1 with PNP connection
    *4. When used as control output DO2 with PNP connection
    *5. When used as analog output AO

  • M12 connector pin assignments

RS-485 Type

  • NPN setting (when load is connected by
    NPN with the push-pull setting)

    *1. When used as control output
    *2. When used as external input
    *3. Default setting for the termination resistor is ON.
    When multi-drop connections are made, turn the termination resistor OFF at all units except the unit which is connected at the end.

  • PNP setting (when load is connected by
    PNP with the push-pull setting)

    *1. When used as external input
    *2. When used as control output
    *3. Default setting for the termination resistor is ON.
    When multi-drop connections are made, turn the termination resistor OFF at all units except the unit which is connected at the end.

  • 6-wire twisted pair cable
    (CD-MC1206-G□S)

    8-wire twisted pair cable for multi-drop
    (CD-MC1208-G□M)

  • M12 connector pin assignments

Dimensions

(Unit : mm)

Sensor

Connector cables for IO-Link/analog output

  • Standard cables

    YF2A15-020VB5XLEAX
    YF2A15-050VB5XLEAX
    YF2A15-100VB5XLEAX

    Minimum bending radius:
    Cable diameter × 5 (when fixed in place)

  • Bending resistant cables

    DOL-1205-G02M-R
    DOL-1205-G05M-R

    Minimum bending radius:
    Cable diameter × 2 (when fixed in place)
    Cable diameter × 6 (when movable)

Connector cables for RS-485 communication

  • 6-wire twisted pair cable

    CD-MC1206-G2S
    CD-MC1206-G5S

    Minimum bending radius:
    Cable diameter × 5 (when fixed in place)
    Cable diameter × 8 (when movable)

  • 8-wire twisted pair cable for multi-drop

    CD-MC1208-G2M
    CD-MC1208-G5M

    Minimum bending radius:
    Cable diameter × 5 (when fixed in place)
    Cable diameter × 8 (when movable)

Mounting bracket

  • BEF-WN-OD2000-B

Learn more about IO-Link

”IO-Link Complete Guide"
with basic and technical information on IO-Link

Click here for details