• CF lens CS-CF01

  

• Laser marker CS-LDP

  

Wiring Diagram

• Output cable

  

  

  
  

  *1 Connect to the 4-20 mA input of an analog device.
  Analog output allowable load 250Ω and analog output impedance 47 Ω
  *2 External trigger: Switches on/off in the range from 2 to 5.
  *3 Bank switch: Switches OPEN/CLOSE in the range from 2 to 6 or from 2 to 7 to select a bank.

• 

  *4 When you cut the output cables shorter, a shielded cable for reinforcement will come out.
  Cut the shielded cable to prevent it from contacting with other cables.
  * Cables not used should be cut so that they do not contact with other cables, and insulated with adhesive tape or by other methods.