Type	Shape	Detection mode	Sensing distance (Figures in parentheses are with sensitivity correction settings ON)	Model (Models in parentheses are connector types)
Coaxial retro-reflective		Long		DSR-800
		Standard
		Fast
		Long		DSR-5000
		Standard
		Fast
Coaxial diffuse reflective		Long		DSD-100
		Standard
		Fast
Through-beam				DSTC-200 (DSTC-200-M8)
Through-beam length measurement				DSTA-200 (DSTA-200-M8)

	Control output	Analog output	External input	Connection type	Model
					NPN type	PNP type
Stand-alone type	2 ch	4 to 20 mA	Select from teaching, synchronization, laser off, or counter reset	Cable type 2 m	D2SA-MNS	D2SA-MPS
Inter-connection master					D2SA-MN	D2SA-MP
Inter-connection slave					D2SA-SN	D2SA-SP

	Control output	Analog output	External input	Connection type	Model
					NPN type	PNP type
Stand-alone type	1 ch	-	-	Cable type 2 m	D2SA-MN3S	D2SA-MP3S
Inter-connection master					D2SA-MN3	D2SA-MP3
Inter-connection slave					D2SA-SN1	D2SA-SP1
Stand-alone type			Select from teaching, synchronization, laser off, or counter reset	M8 Connector type	D2SA-MNS-M8	D2SA-MPS-M8
Inter-connection master					D2SA-MN-M8	D2SA-MP-M8
Inter-connection slave					D2SA-SN-M8	D2SA-SP-M8

•For the connector type, please purchase an optional M84CN series connector cable.

Type		Coaxial retro-reflective type	Long range coaxial retro-reflective type	Coaxial diffuse reflective type
Model	Cable type	DSR-800	DSR-5000	DSD-100
	Connector type	-	-	-
Sensing distance	Long mode	0 to 8 m*1 (With sensitivity correction settings ON: 0.2 to 20 m)	0.5 to 50 m*2 (With sensitivity correction settings ON: 1 to 70 m)	1 m (With sensitivity correction settings ON: 1.5 m)*3
	Standard mode	0 to 5 m*1	0.3 to 35 m*2	0.7 m*3
	Fast mode	0 to 2 m*1	0.1 to 20 m*2	0.25 m*3
Spot size		Approx. ø2 mm / at a distance of 2 m	Approx. ø2 mm / at a distance of 2 m	Approx. ø1 mm / at a distance of 1 m
Light source		Red semiconductor laser (655 nm 3 mW max Class 2 <IEC/JIS>*4)
Indicators		Laser emission indicator (green LED) Output indicator (orange LED)
Connection with amplifier		Cable with system specific plug (e-CON)
Applicable regulations		EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10)
Applicable standards		EN 60947-5-7
Company standards		Noise resistance: Feilen Level 3 cleared
Environmental resistance	Ambient temperature/humidity	-10 to +55℃ (no freezing) / 35 to 85% RH (no condensation)
	Ambient illuminance	Sunlight: 10,000 lx Incandescent lamp: 3000 lx
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
	Shock resistance	Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
Degree of protection/materials		IEC regulation IP67 Housing, cover: PC Window: PMMA (glass fiber filled)
Weight (including cable)		45 g
Included accessories		Reflector: MP-45	Reflector: MP-45 and P250F	-

*1. Sensing distance when using the lens attachment BL-W130L-1 is as follows.
Line beam, Long mode: 2 m / Standard mode: 1.5 m / Fast mode: 1 m
Area beam, Long mode: 1.5 m / Standard mode: 1 m / Fast mode: 0.6 m
*2. DSR-5000 includes two reflectors; P250F and MP-45.
Sensing distances in the table are when using P250F. The sensing distances when using MP-45 are as follows.
Long mode: 0.5 m to 20 m / Standard mode: 0.3 m to 10 m / Fast mode: 0.1 to 5 m
*3. Using a 200 × 200 mm white sheet of paper.
*4. Classified as Class II in the US FDA standards.
Note) The measurement condition is at an ambient temperature of +24℃ (normal temperature) unless otherwise designated.

Type		Through-beam type	Through-beam/length measurement type
Model	Cable type	DSTC-200	DSTA-200
	Connector type	DSTC-200-M8	DSTA-200-M8
Sensing distance	Long mode	2 m	2 m 0.5 m: Length measurement mode*1
	Standard mode
	Fast mode
Spot size		Approx. ø2 mm / at a distance of 2 m	Approx. 30 × 2.5 mm / at a distance of 2 m
Light source		Red semiconductor laser (655 nm 390 μW max Class 1 <IEC/JIS>*2)
Indicators		Laser emission indicator (green LED) Output indicator (orange LED)
Connection with amplifier		Cable type: Cable with system specific plug (e-CON) / Connector type: Dedicated M8 connector cable with system specific plug (e-CON)
Applicable regulations		EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10)
Applicable standards		EN 60947-5-7
Company standards		Noise resistance: Feilen Level 3 cleared
Environmental resistance	Ambient temperature/humidity	-10 to +55℃ (no freezing) / 35 to 85% RH (no condensation)
	Ambient illuminance	Sunlight: 10,000 lx Incandescent lamp: 3000 lx
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
	Shock resistance	Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
Degree of protection/materials		IEC regulation IP67 Housing, cover: PC Window: PMMA (glass fiber filled)
Weight (including cable)		90 g	115 g
Included accessories		Dedicated M8 connector cable with system specific plug (e-CON) (connector type only)

*1. For the response time when in length measurement mode, set Long mode or Standard mode. In addition, use an advanced function type for the amplifier unit.
*2. Classified as Class II in the US FDA standards.
Note) The measurement condition is at an ambient temperature of +24℃ (normal temperature) unless otherwise designated.

Type			Stand-alone type	Inter-connection master	Inter-connection slave
Model	NPN	Cable type	D2SA-MNS	D2SA-MN	D2SA-SN
	PNP		D2SA-MPS	D2SA-MP	D2SA-SP
Response time			60 μs (Fast mode)*1 / 500 μs (Standard mode) / 2 ms (Long mode)
Distance adjustment			Teaching / manual adjustment
Indicators			Laser emission indicator (green LED) Output CH1 and CH2 indicator (orange LED) Teaching indicator (red LED) Channel CH1 and CH2 indicator (green LED)
Digital display			7-segment, 8-digit display
I/O settings			Input settings (select from teaching*2, synchronization, laser off, or counter reset) Output settings (CH2 output can be set for use as control output or an alarm output)
Control output			NPN/PNP Open collector MAX. 100 mA/30 VDC
Analog output			4 to 20 mA*3 (usable in Long mode or Standard mode)
Timer function			OFF delay / ON delay / one-shot / no display 1 ms to 9 s (adjustment is possible in 1 ms increments)
Output mode			Light ON / Dark ON function switching
Connection type			Cable type: Cable length: 2 m (ø3.8 mm)
Insulation resistance			20 MΩ or more (with 500 VDC)
Rating	Supply voltage		12 to 24 VDC ±10%, including 10% ripple (p-p)
	Current consumption		45 mA or less (at 24 V)
Applicable regulations			EMC directive (2004/108/EC)
Applicable standards			EN 60947-5-7
Company standards			Noise resistance: Feilen Level 3 cleared
Environmental resistance	Ambient temperature/humidity		-25 to +55℃*4 (no freezing) / 35 to 85% RH (no condensation)
	Vibration resistance		10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
	Shock resistance		Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
	Degree of protection/materials		IEC regulation IP50 Housing, cover: PC
Weight			Cable type: Approx. 65 g (including cable)
Included accessories			Mounting bracket

*1. For the response time when connected, set Long mode or Standard mode.
*2. External teaching is a teaching mode set in the amplifier main unit and executed in advance.
*3. Load impedance 300 Ω or less
*4. Total No. of connectable units when including the master unit: 1 to 3 units. -25 to +50℃ when linking a total of 4 to 8 units.

Type			Stand-alone type	Inter-connection master	Inter-connection slave
Model	NPN	Cable type	D2SA-MN3S	D2SA-MN3	D2SA-SN1
		Connector type	D2SA-MNS-M8	D2SA-MN-M8	D2SA-SN-M8
	PNP	Cable type	D2SA-MP3S	D2SA-MP3	D2SA-SP1
		Connector type	D2SA-MPS-M8	D2SA-MP-M8	D2SA-SP-M8
Response time			60 μs (Fast mode)*1 / 500 μs (Standard mode) / 2 ms (Long mode)
Distance adjustment			Teaching / manual adjustment
Indicators			Laser emission indicator (green LED) Output indicator (orange LED) Teaching indicator (red LED) Channel indicator (green LED)
Digital display			7-segment, 8-digit display
I/O settings			Select from teaching*2, synchronization, laser off, or counter reset (Can be set for connector types only)
Control output			NPN/PNP Open collector MAX. 100 mA/30 VDC
Analog output			-
Timer function			OFF delay / ON delay / one-shot / no display 1 ms to 9 s (adjustment is possible in 1 ms increments)
Output mode			Light ON / Dark ON function switching
Connection type			Cable type: Cable length: 2 m (ø3.8 mm), Connector type: M8, 4-pin
Insulation resistance			20 MΩ or more (with 500 VDC)
Rating	Supply voltage		12 to 24 VDC ±10%, including 10% ripple (p-p)
	Current consumption		45 mA or less (at 24 V)
Applicable regulations			EMC directive (2004/108/EC)
Applicable standards			EN 60947-5-2
Company standards			Noise resistance: Feilen Level 3 cleared
Environmental resistance	Ambient temperature/humidity		-25 to +55℃*3 (no freezing) / 35 to 85% RH (no condensation)
	Vibration resistance		10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
	Shock resistance		Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
	Degree of protection/materials		IEC regulation IP50 Housing, cover: PC
Weight			Cable type: Approx. 65 g (including cable)
Included accessories			Mounting bracket

*1. For the response time when connected, set Long mode or Standard mode.
*2. External teaching is a teaching mode set in the amplifier main unit and executed in advance.
*3. Total No. of connectable units when including the master unit: 1 to 3 units. -25 to +50℃ when linking a total of 4 to 8 units.
• For the connector type, please purchase an optional JCN series connector cable.