Type		Shape	Sensing distance	Model (Types with timer functions shown in parentheses)
Universal voltage	Through beam			VT-4000 (VT-4000T)
	Retro reflective			VR-1000 (VR-1000T)
	Diffuse reflective			VD-130 (VD-130T)
				VD-300 (VD-300T)

Type		Shape	Sensing distance	Model (Types with timer functions shown in parentheses)
				NPN type	PNP type
DC power	Through beam			VT-3000N	VT-3000P
	Retro reflective			VR-800N	VR-800P
	Diffuse reflective			VD-100N	VD-100P
				VD-250N	VD-250P

Type			DC power type
			Through-beam type	Retro-reflective type	Diffuse-reflective type
Mode	NPN	No timer function	VT-3000N	VR-800N	VD-100N	VD-250N
		With timer function	-
	PNP	No timer function	VT-3000P	VR-800P	VD-100P	VD-250P
		With timer function	-
Sensing distance			30 m	0.01 to 8 m*1	1 m*2	2.5 m*3
Light source			Red LED			Infrared LED
Response time			1.5 ms or less			5 ms or less
Hysteresis			-		20% or less
Distance adjustment			1-turn potentiometer (240°)
Indicators			Output indicator (orange LED), Power indicators for through-beam type emitters (red LED)
Control output			NPN/PNP Open collector Max. 100 mA/30 VDC
Output mode			Light ON / Dark ON selection switch
Test input			Equipped
Connection type			Terminal block type (applicable cable outer diameter: ø6 to ø10 mm), Conduit : PF1/2 (JIS B0202)
Insulation resistance			20 MΩ or more (500 VDC)
Rating	Supply voltage		10 to 30 VDC, including 10% ripple (p-p)
	Current consumption		35 mA or less
Applicable regulations			EMC directive (2004/108/EC)
Applicable standards			EN 60947-5-2
Company standards			Noise resistance: Feilen Level 3 cleared
Environmental resistance	Ambient temperature/humidity		-25 to +55℃ (no freezing) / 35 to 85% RH (no condensation)
	Ambient illuminance		Sunlight: 10,000 lx or less, Incandescent lamp: 3,000 lx
	Vibration resistance		10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
	Shock resistance		Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
	Degree of protection		IP67
Material			Housing/Cover: ABS (glass fiber filled), Lens/Lens cover: PMMA
Weight without cable			Emitter: 70 g Receiver: 90 g	95 g
Included accessories			Mounting bracket BEF-W260	Mounting bracket BEF-W260 Reflector: V-61	Mounting bracket BEF-W260

*1. With the V-61 reflector
*2. Using a 200 ☓ 200 mm white sheet of paper.
*3. Using a 400 ☓ 400 mm white sheet of paper.
• Specifications are subject to change without prior notice for product improvement purposes.

Type		Universal voltage type
		Through-beam type	Retro-reflective type	Diffuse-reflective type
Model	No timer function	VT-4000	VR-1000	VD-130	VD-300
	With timer function	VT-4000T	VR-1000T	VD-130T	VD-300T
Sensing distance		40 m	0.01 to 10 m*1	1.3 m *2	3 m *3
Light sourc		Red LED			Infrared LED
Response time		20 ms or less
Hysteresis		-		20% or less
Distance adjustment		1-turn potentiometer (240°)
Indicators		Output indicator (orange LED), Power indicators for through-beam type emitters (red LED)
Only types with timer functions		ON and OFF delay: 0.1 to 10 seconds
Control output		Relay 1C *4 250 VAC 3 A or less, 30 VDC 3 A or less
Output mode		Fixed to Light ON
Connection type		Terminal block type (applicable cable outer diameter: ø6 to ø10 mm), Conduit : PF1/2 (JIS B0202)
Insulation resistance		20 MΩ or more (500 VDC)
Rating	Supply voltage	12 to 240 VDC, 24 to 240 VAC 50/60Hz
	Power consumption	8.5 VA	5 VA
Applicable regulations		EMC directive (2004/108/EC), Low voltage directive (2006/95/EC)
Applicable standards		EN 60947-5-2
Company standards		Noise resistance: Feilen Level 3 cleared
Environmental resistance	Ambient temperature/humidity	-25 to +55℃ (no freezing) / 35 to 85% RH (no condensation)
	Ambient illuminance	Sunlight: 10,000 lx or less, Incandescent lamp: 3,000 lx
	Voltage resistance	2700 VAC / minute
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
	Shock resistance	Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions
	Degree of protection	IP67
Material		Housing/Cover: ABS (glass fiber filled), Lens/Lens cover: PMMA
Weight without cable		Emitter: 70 g Receiver: 90 g	95 g
Included accessories		Mounting bracket BEF-W260	Mounting bracket BEF-W260 Reflector: V-61	Mounting bracket BEF-W260

*1. With the V-61 reflector
*2. Using a 200 ☓ 200 mm white sheet of paper.
*3. Using a 400 ☓ 400 mm white sheet of paper.
*4. When driving the inductive load (with an induction valve, electromagnetic contactor, etc.) through the relay connection point, please use a noise absorption device (surge absorber).
• Specifications are subject to change without prior notice for product improvement purposes.
• Products certified for the Chinese CCC compulsory certification system also available. Contact us for details.