IO-Link MasterUR Series
Highly functional IO-Link Master for various industrial Ethernet
- First in industry* Mixed connection of digital Sink(NPN) / Source(PNP) I/O devices is realized with one unit
- Largest no. in industry* 16 channels
- Fastest in industry* Realized the minimum cycle time of 0.3 ms
NEW MODELS
e-CON type, UR-ME/EE16DT added to lineup
*Regarding IO-Link Master, surveyed by OPTEX FA in December, 2023.
-
Accurate data collectionSince IO-Link handles sensor measurement values as digital signals, there is no change in values due to noise, and the measured values can be accurately collected.
-
Easy setupParameter settings for IO-Link pressure and flow sensors can be set from a host on the network. This reduces the possibility of sensor setting errors or unintentional setting omissions. The parameters once set can be backed up to the UR Series IO-Link master. If the sensor is replaced with one of the same model, the setting information can be restored to avoid accidentally different information than before.
-
Miswire / Wire Break DetectionAny point that differs from the preconfigured connection information will be detected as a miswire. Even if power to an IO-Link device (sensor) is cut off due to a wire break, the determination signal of the sensor is maintained without interruption, and the wire break can be detected.
-
Multi-point / Distributed I/O ControlIn addition to IO-Link type devices, sink (NPN) and source (PNP) input/output devices can be connected to the IO-Link master, enabling effective use of remaining channels other than IO-Link type devices connection.
Optimal solutions for pressure sensors and flow sensors
