Sensing Spot LightingOPS-S Series

DOWNLOAD

5 times the brightness of conventional products!
Strobe lighting type for overdrive is 10 times brighter than conventional products!

  • High-brightness, high-uniform types for optimization with telecentric lenses
  • New “FALUX-it” technology for 12 VDC drivability eliminating the need for a dedicated power supply and resistance box
OPS-S Series

Lineup

Controller Type Model Illumination
Color 		Power
Consumption
[W] 		Weight
[g] 		Input
Sensing support
PWM type
 High-brightness type OPS-S20R Red 2.5 40 12 VDC
OPS-S20☐ White, Blue 2.8
Highly uniform type OPS-S20R-U Red 2.5
OPS-S20☐-U White, Blue 2.8
High-brightness type
dedicated for overdrive
strobe lighting 		OPS-ST20☐ White, Blue 2.8 18 VDC*1
Constant current
type 		High-brightness type OPS-C20R Red 2.5 Constant
current control
700 mA max.
*2
OPS-C20☐ White, Blue 2.8
Highly uniform type OPS-C20R-U Red 2.5
OPS-C20☐-U White, Blue 2.8

*1 Applicable power supply: OPPF Series

*2 Applicable power supply: OPPCW Series

☐=W: White, B: Blue

Specifications

Type PWM type with sensing support High-brightness type for strobe lighting Constant current type
Model OPS-
S20W (-U) 		OPS-
S20R (-U) 		OPS-
S20B (-U) 		OPS-
ST20W 		OPS-
ST20B 		OPS-
C20W (-U) 		OPS-
C20R (-U) 		OPS-
C20B (-U)
Illumination color White Red Blue White Blue White Red Blue
Color temperature /
Peak wavelength 		6,300 K 640 nm 470 nm 6,300 K 470 nm 6,300 K 640 nm 470 nm
Input 12 V 18 V*1 Constant current control: 700 mA max.*2
Recommended PWM frequency 50 kHz to 150 kHz -
Self-oscillation frequency
when DC voltage is applied 		50 kHz to 60 kHz -
Light-emitting surface size o7 mm
Ambient temperature/humidity 0 to 40°C / 35 to 85% RH (no condensation)
Storage temperature/humidity -20 to 70°C / 35 to 95% RH (no condensation)
Vibration resistance 10 to 55 Hz; amplitude 1.5 mm; 8 hours in each of the X, Y, and Z directions
Shock resistance 10 G, 3 times in each of the X, Y, and Z directions
Classification
(IEC62471: 2006) 		OPS-S20W / OPS-S20B (-U) / OPS-ST20W / OPS-ST20B / OPS-C20W / OPS-C20B (-U): Risk Group 2 (Moderate-Risk)
OPS-S20W-U / OPS-S20R (-U) / OPS-C20W-U / OPS-C20R (-U): Risk Group 1 (Low-Risk)
Applicable
regulations/standards 		EMC (2014/30/EU), RoHS (2011/65/EU, MIIT Order No.32) / EN 61326-1:2013
Protection rating IP40 (IEC 60529: 1989 / A1: 1999 + A2: 2013)
Degradation of LED 40,000 h 30,000 h 40,000 h 30,000 h 40,000 h
For brightness to drop 30% (Dimming value setting = 100%, 25°C) *Typical values
Protection circuit Automatic shutoff if internal temperature reaches 100°C None
Material Housing: ADC12, Lens: PC (UV-resistant)
Options Condensing lens

*1 Applicable power supply: OPPF Series (excluding 500 kHz, luminescence width setting: 1 ms or less)

*2 Applicable power supply: OPPCW Series

Emission spectrum diagram