Displacement Sensor Communication UnitsUQ1 Series
Can be connected to Mitsubishi Electric PLCs!
The industry’s first displacement sensor
control unit
- With three industry firsts, this unit enables high-speed connection of displacement sensors!
- Easy connection and set up.
Selection table
| Type | Applicable models | Model |
|---|---|---|
| Displacement sensor control unit | CD5 series | UQ1-01 |
| Displacement sensor control unit | RS-422 type of the CD33 series | UQ1-02 |
Specifications
| Model | UQ1-01 | UQ1-02 | |
|---|---|---|---|
| Number of occupied I/O points | 32-points, 1 slot | ||
| Sampling period | Max. 100 μs | Max. 500 μs | |
| Communication method (between adjacent units) | Infrared ray | ||
| Terminal block |
Usable wire | Core 0.3 to 0.75 mm2 (outer diameter 2.8 mm or less) | |
| Usable solderless terminal | R1.25-3 without sleeve | ||
| Protocol (Between UQ1 to CD5) |
No. of sensor head | Max. 2 heads | Max. 2 sensors |
| Protocol | RS-422 | ||
| Baud rate | 921.6 kbps | 256 kbps | |
| Cable | DOL-1212-G☐☐M | - | |
| Cable extension | Up to 50 m using an optional extension cable (not included) | - | |
| Judgment output |
I/O terminals | 2 Input / 2 Output | |
| Mode | NPN open collector output | ||
| Output voltage | 12 to 24 VDC (±10%) | ||
| Output current | 80 mA (12 to 24 VDC) | ||
| Residual voltage | 2 V or less | ||
| Leak current | 0.2 mA or less | ||
| Protection | Overcurrent detection circuit | ||
| Trigger input |
Conditions | ON when connected to ground | |
| Voltage | ON voltage: 1.0 V or less / OFF voltage: 2.0 V or more | ||
| Input impedance | Approx. 10 kΩ | ||
| Functions | Sensor head settings, control output, calculation, various hold functions, filter function, bank settings, storage function |
Sensor settings, control output, calculation, various hold functions, bank settings, storage function |
|
| High speed logging point | Max. 262,144 points | ||
| EEPROM overwriting limit | Max. 1,000,000 times for same memory area | ||
| 5 VDC current consumption | 0.5 A or less | ||
| Noise tolerance | 500 V p-p (simulator), Noise width: 1 μs Fast transient noise 1 kV (IEC 61000-4-4) |
||
| Insulation resistance | Min. 10 MΩ (insulation resistance meter) | ||
| Environmental resistance |
Degree of protection | IP2X | |
| Ambient temperature |
-10 to +55℃ (no freezing or condensation)/ When stored: -20 to +70℃ |
||
| Ambient humidity | 35 to 85% RH / When stored: 35 to 85% RH | ||
| Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions |
||
| Applicable regulations | EMC directive (2004/108/EC) | ||
| Applicable standards | EN 61131-2 | ||
| Dimensions | 98 (H) × 27.4 (W) × 90 (D) [mm] | ||
| Weight | Approx. 150 g | ||