Discontinued Products
For suitable alternatives, please feel free to contact us.
- Recommended Alternatives
Specifications
Technical Data
| Type | DC power type | |||||
|---|---|---|---|---|---|---|
| Through-beam type | Retro-reflective type | Diffuse-reflective type | ||||
| Mode | NPN | No timer function | VT-3000N | VR-800N | VD-100N | VD-250N |
| With timer function | - | |||||
| PNP | No timer function | VT-3000P | VR-800P | VD-100P | VD-250P | |
| With timer function | - | |||||
| Sensing distance | 30 m | 0.01 to 8 m*1 | 1 m*2 | 2.5 m*3 | ||
| Light source | Red LED | Infrared LED | ||||
| Response time | 1.5 ms or less | 5 ms or less | ||||
| Hysteresis | - | 20% or less | ||||
| Distance adjustment | 1-turn potentiometer (240°) | |||||
| Indicators | Output indicator (orange LED), Power indicators for through-beam type emitters (red LED) |
|||||
| Control output | NPN/PNP Open collector Max. 100 mA/30 VDC | |||||
| Output mode | Light ON / Dark ON selection switch | |||||
| Test input | Equipped | |||||
| Connection type | Terminal block type (applicable cable outer diameter: ø6 to ø10 mm), Conduit : PF1/2 (JIS B0202) | |||||
| Insulation resistance | 20 MΩ or more (500 VDC) | |||||
| Rating | Supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | ||||
| Current consumption | 35 mA or less | |||||
| Applicable regulations | EMC directive (2004/108/EC) | |||||
| Applicable standards | EN 60947-5-2 | |||||
| Company standards | Noise resistance: Feilen Level 3 cleared | |||||
| Environmental resistance | Ambient temperature/humidity | -25 to +55℃ (no freezing) / 35 to 85% RH (no condensation) | ||||
| Ambient illuminance | Sunlight: 10,000 lx or less, Incandescent lamp: 3,000 lx | |||||
| Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions |
|||||
| Shock resistance | Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions |
|||||
| Degree of protection | IP67 | |||||
| Material | Housing/Cover: ABS (glass fiber filled), Lens/Lens cover: PMMA | |||||
| Weight without cable | Emitter: 70 g Receiver: 90 g | 95 g | ||||
| Included accessories | Mounting bracket BEF-W260 |
Mounting bracket)@@@ BEF-W260 Reflector: V-61 |
Mounting bracket BEF-W260 | |||
*1. With the V-61 reflector
*2. Using a 200 ☓ 200 mm white sheet of paper.
*3. Using a 400 ☓ 400 mm white sheet of paper.
• Specifications are subject to change without prior notice for product improvement purposes.
| Type | Universal voltage type | ||||
|---|---|---|---|---|---|
| Through-beam type | Retro-reflective type | Diffuse-reflective type | |||
| Model | No timer function | VT-4000 | VR-1000 | VD-130 | VD-300 |
| With timer function | VT-4000T | VR-1000T | VD-130T | VD-300T | |
| Sensing distance | 40 m | 0.01 to 10 m*1 | 1.3 m *2 | 3 m *3 | |
| Light sourc | Red LED | Infrared LED | |||
| Response time | 20 ms or less | ||||
| Hysteresis | - | 20% or less | |||
| Distance adjustment | 1-turn potentiometer (240°) | ||||
| Indicators | Output indicator (orange LED), Power indicators for through-beam type emitters (red LED) |
||||
| Only types with timer functions | ON and OFF delay: 0.1 to 10 seconds | ||||
| Control output | Relay 1C *4 250 VAC 3 A or less, 30 VDC 3 A or less | ||||
| Output mode | Fixed to Light ON | ||||
| Connection type | Terminal block type (applicable cable outer diameter: ø6 to ø10 mm), Conduit : PF1/2 (JIS B0202) | ||||
| Insulation resistance | 20 MΩ or more (500 VDC) | ||||
| Rating | Supply voltage | 12 to 240 VDC, 24 to 240 VAC 50/60Hz | |||
| Power consumption | 8.5 VA | 5 VA | |||
| Applicable regulations | EMC directive (2004/108/EC), Low voltage directive (2006/95/EC) | ||||
| Applicable standards | EN 60947-5-2 | ||||
| Company standards | Noise resistance: Feilen Level 3 cleared | ||||
| Environmental resistance |
Ambient temperature/humidity | -25 to +55℃ (no freezing) / 35 to 85% RH (no condensation) | |||
| Ambient illuminance | Sunlight: 10,000 lx or less, Incandescent lamp: 3,000 lx | ||||
| Voltage resistance | 2700 VAC / minute | ||||
| Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions |
||||
| Shock resistance | Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions |
||||
| Degree of protection | IP67 | ||||
| Material | Housing/Cover: ABS (glass fiber filled), Lens/Lens cover: PMMA | ||||
| Weight without cable | Emitter: 70 g Receiver: 90 g | 95 g | |||
| Included accessories | Mounting bracket BEF-W260 |
Mounting bracket BEF-W260 Reflector: V-61 |
Mounting bracket BEF-W260 |
||
*1. With the V-61 reflector
*2. Using a 200 ☓ 200 mm white sheet of paper.
*3. Using a 400 ☓ 400 mm white sheet of paper.
*4. When driving the inductive load (with an induction valve, electromagnetic contactor, etc.) through the relay connection point, please use a noise absorption device (surge absorber).
• Specifications are subject to change without prior notice for product improvement purposes.
• Products certified for the Chinese CCC compulsory certification system also available. Contact us for details.
Contact Us
Our experts quickly deliver the best plan for your needs and provide continuous support throughout the process.
- Download List
- 20