We indroduce the fiearues of IO-Link Master UR Series on our YouTube video.
IO-Link Master is the interface between IO-Link devices (sensors, actuators, and I/O) and controllers or information systems.
IO-Link device information can be communicated bidirectionally with PLC via industrial Ethernet.
Contribute to the creation of IIoT (Industrial IoT) environments.
Easy configuration
IO-Link Master UR Series comes with an OLED display.
Configure the settings from a host computer or PLC, or use the IO-Link Master operations for easy configuration by anyone.
Each channel can be utilized as a digital IO
Our IO-Link Master UR Series can connect not only to source (PNP) digital I/O devices but also to sink (NPN) digital I/O devices.
Connect the 16-channel IO-Link ports to IO-Link devices, or use them for sink (NPN) input or source (PNP) output.
You can configure ports separately to mix and match.
This ensures effective utilization without wasting channels.
Use case: Optimal solutions for pressure sensors and flow sensors
Using UR Series with IO-Link compatible pressure sensors and flow sensors offers many advantages.
- Accurate data collection -
Since IO-Link handles sensor measurement values as digital signals, there is no change in values due to noise.
- Easy setup -
Parameter settings for IO-Link devices can be set from a host on the network.
- Easy Miswire Detection and Wire Break Detection -
- Multi-point and Distributed I/O Control -
IO-Link type devices, sink (NPN) and source (PNP) input/output devices can be connected to the IO-Link Master.