Sensing LED Ring LightingOPR Series

DOWNLOAD

“FALUX sensing” enables monitoring of brightness and feedback control

  • Using the attachment lens allows switching between 3 illumination angles
  • Two to three times the amount of light of conventional models with improved uniformity of illumination distribution
OPR Series

Lineup

Model *1 *2 *3 Weight [g]
OPR-32-10□ - Applicable - 35
OPR-S55-28□ Applicable Applicable Applicable 60
OPR-S70-43□ Applicable Applicable Applicable 75
OPR-S85-58□ Applicable Applicable Applicable 90

Model *1 White Red Blue
Power Consumption[W] Power Consumption[W] Power Consumption[W]
OPR-32-10□ 3.1 2.1 2.1
OPR-S55-28□ 5.1 4.2 3.6
OPR-S70-43□ 7.2 6.2 4.9
OPR-S85-58□ 9.2 7.2 6.2

*1 □: W (white), R (red), B (blue)

*2 For "FALUX sensing", connect to LED lighting controller OPPF Series or OPPD-30E.

*3 A condensing attachment is installed at purchase. The tightening torque for screws during replacement should be 5 cN・m or less.

Specifications

Illumination color White Red Blue
Color temperature / Peak wavelength 6,000 K 635 nm 470 nm
Input voltage 12 VDC
Degradation of LED For brightness to drop 10% after 7,000 hours
(Dimming value setting = 100%, 30℃) *Typical values
Classification (IEC62471: 2006) Risk Group 1 (Low-Risk)
Applicable regulations/standards EMC (2014/30/EU), RoHS (2011/65/EU, MIIT Order No.32) / EN 61326-1:2013
Protection rating IP40 (IEC 60529: 1989 / A1: 1999 + A2: 2013)
Ambient temperature/humidity 0 to 40℃ / 35 to 85% RH (no condensation)
Storage temperature/humidity -20 to 70℃ / 35 to 95% RH (no condensation)
Vibration resistance 10 to 55 Hz; amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
Shock resistance 10 G, 3 times in each of the X, Y, and Z directions
Material Housing: ADC12 and PC, Lens: PC (UV-resistant) and PMMA
Options Low-angle attachment, diffusion plate (60% or 80%), transparent cover,

Emission spectrum diagram