Measuring dimensions of sidewall of the tire by laser displacement sensor CDX series.
Conventional laser displacement sensors had high power laser (laser Class 3R or stronger) to measure the black rubber surface which is not reflective though, CDX can measure it with laser Class 1 stably thanks to its high sensitivity.
Measurement of black workpieces with high measurement stability keeping safety of human eyes is possible.

Measuring thickness and width of building board by multiple CD22 series.
By utilizing displacement sensor amplifier CDA, you can setup those CD22 sensors very easily and also calculation of thickness or width can be done easily by CDA. You can also connect CD22 to Mitsubishi MELSEC-Q/L series through combination of CDA and CC-Link communication unit UC1 series without any ladder programing. Because it's iQSS compliant, you can set and read setup value, backup of it in short time.

Checking if the slit width on the carton is correct or not by LS series.
It can measure X axis in 25μm resolution so you can check the slit width accurately.

Inspection if the plastic part is stuck on the board correctly or not by LS series.
It can measure the gap when the plastic part is not stuck on the board correctly very precisely even if the position varies in the measuring range, 27mm Max., in X axis.

Inspection of edge part of plywood by LS series.
Standard displacement sensor just measure distance to the point though, LS series can measure profile of the object precisely so it can check the shape of edge part of the plywood.

Checking if the cap is sitting at correct position or not by LS series.
LS series can measure height and width in X axis at one time by line laser beam so you can check how the cap is sitting on the bottle very easily.

It can check level of pasty foods filled in the tray. It measures distance from top of the tray down to the level of the pasty foods even if its height is not stable on the conveyer.

Detecting if the lid of the individual package is glued correctly or not by LS series.
Normally, you have to use multiple sensors to detect height difference between the package and the lid though, LS-100CN can measure the height difference at one time. You can save cost and make the system simple.

Measuring inner diameter of pipe by CD22 series.
Because of its size, you can install the sensor head inside of the pipe, bigger than 50mm of inner diameter.

Checking size of the metal parts after processing by LS series.
It can measure depth in Z axis and width between edge to another edge in X axis at one time. It can measure 4 items at one time and get calculation using those measurement results so checking quality of the parts will be very simple and efficient.

Checking shape of the rim part of the tire by LS series.
It can measure height (Z axis) and edge position (X axis) at one time so you can check the shape of the tire rim very efficiently. It can measure the object even if its color is varies.

CD5 can measure tread and two sidewalls at a time using three sensor head connected to one controller CD5A.
It can calculate using three measurement values as well.

Checking shape of the parts by measuring height and edge position in X axis by LS series.
Its measurement range in X axis is 27mm Max. and can measure height and position of edge and check shape of the parts.

Measuring length of the protruding pipe and height of the bolt by LS series.
Measurement at multiple point of the pipe protruding from the surface and height of four bolts can be done by one LS sensor because it can measure 2 dimension, height and width.

Measuring position of the metal plate by CD22.
By utilizing CDA (CD22 controller) and UC1 series (CC-Link communication unit), you can connect sensor to Mitsubishi MELSEC-Q/L series and setup, backup and measurement can be done easily and remotely.

Checking type of the parts for automotive by measuring width of groove by LS series.
LS series can measure not only height but also width in x axis so you can measure width of the groove on the parts and sort by type.

Checking existence and position of O-ring by LS series.
It can check existence and position of O-ring with diameter less than 27mm that LS-100CN covers at one time.

Checking amount of the sealing object supplied by LS series.
LS series can check width and height of object at one time so checking amount of the sealing object will be done efficiently.

Checking quality of door parts assembly by LS series.
It can measure not only width but also height so checking quality of door parts assembly will be done efficiently.

Checking gap and height difference of the door and body by LS series.
Mechanical gauge might make scratches on the body and using multiple displacement sensor may be very difficult on positioning of those sensor heads but LS series can check and measure the gap and height difference because it has 27mm area to check width and height at one time.

Checking quality of the rivet by LS series.
It can measure height and width at one time so it can check quality of the rivet at one time efficiently.

CD5-85 can measure coplanarity of IC/LSI precisely by its repeat accuracy 1um.

Measurement of tolerance of gap of the relay contact by LS series.
Because it is amplifier built-in structure, you can setup watching the display easily and also you can setup remotely by connecting to PC utilizing free setup software.

Measuring width of the sheet by 2D displacement sensor LS series.
Having two LS sensor and detect the position of edges. Then, width of the sheet can be calculated and position of the sheet can be controlled by sending information from LS series to the control system. LS series is diffuse type so it can be installed in small space.