Housed in stainless steel, ZT-M3000N photoelectric sensors are able to detect crushed cans on a production line.
Installing these through-beam type sensors at the height that determines whether a can is defective allows for judgment between acceptable and non-acceptable cans.
The stainless-steel housing also makes it possible to install the sensors in a caustic soda environment, which can have adverse effects on sensors with plastic housings.

Heat resistant fiber cable NF-TH02 can detect chip parts in the feeder. It can be used in high temperature up to 180℃.

BGS-Z10 can detect existence of PWB in the drying process after coating.
BGS-Z10 is good for detecting objects with various colors and also angled objects.

Chemical resistant fiber cable NF-TY02 is coated with fluorine resin.
It can detect wafers in corrosive environment.

Thru-beam type laser sensor ZT-L3000 can detect carrier trays in chamber through small window. Its small spot size realizes accurate positioning.

Transparent chemical-resistant type fiber unit NF-TY02 minimizes influences from dust and chemical vapor.

The combination of heatproof NF-DH01 and heatproof reflective mirror SW50 make it possible to detect as Retro-reflective type.
Those work well for transparent detection at high temperature.

Although Thru-beam type is used for detecting glossy object normally, retro-reflective type sensor Z2R-400N can detect glossy object stably because its polarizing filter built-in.