The BGS-HDL series can be used to detect the presence of colorful outer packaging paper and whether the papers are overlapped.
The BGS-HDL series’ two control outputs enable simultaneous detection of both the presence of the outer packaging paper and overlapped papers by turning on Output 1 when one sheet is detected, and turning on Output 2 when two or more sheets are detected.
This means that all the work in applications that would conventionally require two sensors can be done with just a single sensor.

The DR-Q digital laser transparent object sensor monitors overlapping transparent containers. Generally, detection is based on height. However, if the difference in height is small, or the line contains mixed objects, height-based detection will be difficult.
With the DR-Q, detection of overlapping containers is possible based on even slight differences in receiving light levels. This makes detection possible even with transparent objects, which proved difficult to detect with conventional models.

C-MOS laser BGS sensor BGS-DL can detect overlapping caps in the parts feeder.
The hysteresis of 100mm sensing distance type is 3% Maximum. It can detect vey small level difference.

BGS-HL has automatic electric shutter function which adjusts sensitivity depends on reflection at the surface of the object that can be utilized for detection of shiny wafer.

Fiber sensor amplifier D3IF and NF-TW01 can detect overlapping silicon wafers.
Wavelength of the light is 1.45μm which goes through silicon wafer and amount of the light changes depends on thickness of the silicon wafer.

Fiber sensor D3IF and specific thru-beam type fiber cable NF-TW01 can detect overlapping films.
As infrared LED applied to D3IF is a wavelength of 1.45μm, stable detection is available.

Transparent detection type, digital laser sensor DR-Q150T detects overlapped transparent plastic bags. This highly-accurate feature prevents downtime due to feeding overlapped plastic bags.

Fiber sensor amplifier D3RF and built-in lens thru-beam type fiber cable NF-TX01 can detect overlapping caps for beverage package because of high power light even if the cap is not transparent.
Controlling, saving setup and restoring setup of each fiber amplifier can be done through CC-Link utilizing communication unit UC1-CL1 connected to Mitsubishi MELSEC-Q/L series efficiently as well.