Circuit Diagram

D2RF-2TN/D2RF-2TCN4, D2RF-TN/D2RF-TCN4,D2RF-TMN/D2RF-TMCN4, D2RF-TSN/D2RF-TSCN4, D2GF-TN/D2GF-TCN4, D2GF-TMN/D2GF-TMCN4, D2GF-TSN/D2GF-TSCN4

NPN output type

*The D2☐F-TS☐☐☐ slave unit does not have power supply wires (brown/blue) because power is supplied from the master unit.
D2RF-TAN, D2RF-2TAN

NPN with Analog output

Connector type

Connecting
- When not used for control output CH2 or external input, cut the lead wire and wrap it individually with insulating tape, and do not connect it to any other terminal.
- 1 to 4 correspond to connector pin No.
Notes
- When using a switching regulator for the power supply, be sure to ground the frame ground terminal.
- Because wiring sensor wires with high-voltage wires or power supply wires can result in malfunctions due to noise, which can cause damage, make sure to wire separately.
- Avoid using the transient state while the power is on (approx. 100 ms).
- The connector direction is set as in the diagram below when using the L-shaped connector cable. Be aware that rotation is not possible.

Contact Us

Our experts quickly deliver the best plan for your needs and provide continuous support throughout the process.