Specifications
| Model | Stand-alone Type | Interconnect type | |
| Master Unit | Slave Unit | ||
| Cable type NPN(PNP) | D2SA-MN3S (MP3S) | D2SA-MN3 (MP3) | D2SA-SN 1(SP1) |
| M8 QD type NPN(PNP) | D2SA-MNS(MPS)-M8 | D2SA-MN(MP)-M8 | D2SA-SN(SP)-M8 |
| Response Time | 60μ/500μ/2msec (Fast/Standard/Long) selectable | ||
| External Input | External Input(*1) : Select one among (1) teach (2) Synchronizing (3) Laser OFF, or (4) Reset Counter (This function is available only with M8-QD type except Slave unit of M8-QD Type) |
||
| Control Output | NPN or PNP Open collector, 100mA Max, residual voltage 1.8V Max | ||
| Analogue Output | N/A | ||
| Timer | On delay / Off delay / One Shot / No delay, 1msec to 9s (1ms increment) | ||
| Output Mode | Light ON / Dark ON selectable | ||
| Crosstalk Prevention | 4pcs Max. | ||
| Sensitivity Adjustment | Teach-in (manual adjustment is possible) | ||
| LED Display | Green (laser power), Orange (output), Red (teaching), Green (working CH) | ||
| Digital Numerical Display | 8 digits (7 segments) | ||
| Current Consumption | 45mA Max, 24V DC | ||
| Power Source | 12 - 24V DC +/- 10%, ripple 10% | ||
| Operating Temp / Humidity (*3) | -25 to 55 C (-13 to 131 F) / 35 to 85% RH (no freezing) | ||
| Store Temp / Humidity | -40 to 70 C (-40 to 158 F) / 35 to 85% RH (no condensation) | ||
| Shock Resistance | 50G (500m/S2) , XYZ 3-ways | ||
| Protection Category | IEC IP50 | ||
| Materials | PC | ||
| (*1) = | The teach mode preset at amplifier will be done with External Teach |
| (*2) = | Load impedance 300 Ω Max |
| (*3) = | Up to 3pcs of interconnection. Up to 30 pcs with 40 C (104F) surroundings operated in 12V DC. |
| Model | Stand-alone Type | Interconnect type | |
| Master Unit | Slave Unit | ||
| Cable type NPN(PNP) | D2SA-MNS (MPS) | D2SA-MN (MP) | D2SA-SN (SP) |
| M8 QD type NPN(PNP) | - | - | - |
| Response Time | 60μ/500μ/2msec (Fast/Standard/Long) selectable | ||
| External Input | External Input(*1) : Select one among (1) teach (2) Synchronizing (3) Laser OFF, or (4) Reset Counter Control Output : 2CH, used as Control Output or Alarm output |
||
| Control Output | NPN or PNP Open collector, 100mA Max, residual voltage 1.8V Max | ||
| Analogue Output | 4-20mA (*2) | ||
| Timer | On delay / Off delay / One Shot / No delay, 1msec to 9s (1ms increment) | ||
| Output Mode | Light ON / Dark ON selectable | ||
| Crosstalk Prevention | 4pcs Max. | ||
| Sensitivity Adjustment | Teach-in (manual adjustment is possible) | ||
| LED Display | Green (laser power), Orange (output), Red (teaching), Green (working CH) | ||
| Digital Numerical Display | 8 digits (7 segments) | ||
| Current Consumption | 45mA Max, 24V DC | ||
| Power Source | 12 - 24V DC +/- 10%, ripple 10% | ||
| Operating Temp / Humidity (*3) | -25 to 55 C (-13 to 131 F) / 35 to 85% RH (no freezing) | ||
| Store Temp / Humidity | -40 to 70 C (-40 to 158 F) / 35 to 85% RH (no condensation) | ||
| Shock Resistance | 50G (500m/S2) , XYZ 3-ways | ||
| Protection Category | IEC IP50 | ||
| Materials | PC | ||
| (*1) = | The teach mode preset at amplifier will be done with External Teach |
| (*2) = | Load impedance 300 Ω Max |
| (*3) = | Up to 3pcs of interconnection. Up to 30 pcs with 40 C (104F) surroundings operated in 12V DC. |
| Model | Retro reflective type | Diffuse reflective type | Thru-beam beam type | Thru-beam / Measurement type | ||
| Cable | DSR-5000 | DSR-800 | DSD-100 | DSTC-200 Emitter: DSTC-D Receiver: DSTC-200 |
DSTA-200 Emitter: DSTA-D Receiver: DSTA-200 |
|
| M8 QD-type | --- | --- | --- | DSTC-200-M8 | DSTA-200-M8 | |
| Emitter M8 | --- | --- | --- | DSTC-S | DSTA-S | |
| Receiver M8 | --- | --- | --- | DSTC-R | DSTA-R | |
| Amplifier unit | D2SA-M□□ /D2SA-M□-M8 /D2SA-S□□ | |||||
| Light source | Visible light semiconductor laser 650nm | |||||
| Output | max.3mW | max.390μW | ||||
| IEC/JIS CLASS | CLASS 2 | CLASS 1 | ||||
| FDA CLASS | Class II | |||||
| Detection distance*1 | Long | 0.5 -50 m | 8 m | 1 m | 2 m | 2 m Length measurement mode :0.5 m (Only Long and Standard) |
| Standard | 0.3 -35 m | 5 m | 0.7 m | |||
| Fast | 0.1 -20 m | 2 m | 0.25 m | |||
| Spot size *2 | Approx.2 mm (Distance:2 m) |
Approx.1 mm (Distance:1 m) |
Approx.2 mm (Distance:2 m) |
Approx.30 x 2.5 mm (Distance:2 m) |
||
| Repeat accuracy *3 | 0.2 mm | 0.2 mm | 0.2 mm | 0.3 mm | ||
| Indicator light | Laser indicator light: Green Output indicator light: Orange | |||||
| Operating temperature/humidity | -10 to +55 /35 to 85 %RH (No condensation or freezing) |
|||||
| Store temperature/humidity | -25 to +70 /35 to 85 %RH (No condensation or freezing) |
|||||
| Ambient light | 3,000 lx (Incandescent light)10,000 lx (Sunlight) | |||||
| Shock resistance | 10 to 55 Hz Double-amplitude 1.5 mm 2 hours at each direction of X,Y and Z | |||||
| Protection category | IP67 | |||||
| Material | PC (Case, Cover) PMMA /Glass (Front glass) | |||||
| Weight (including the codes)*4 | 45g | 90g | 115g | |||
| *1 | DSD-100 :With white paper (90 %)of 200 x 200 mm DSR-800 :With the reflector MP-45 (accessory) |
| *2 | Defined with center strength 1/e2 (13.5%). There may be leak light other than the specified spot size. The sensor may influenced when there is a highly reflective object around the targets |
| *3 | Right angle to sensing axis. |
| *4 | The weights of DSTC-200 and DSTA-200 include the emitter and the receiver. For the model M8-QD type, replacement is available only for the emitter and the detector. |
