Specifications
	BGS-DL series
	Model Laser CMOS BGS (Teach-in type) Laser BGS (Potentiometer type) Type Accurate type Long distance type Accurate type Long distance type Cable type BGS-DL10TN (or DL10TP) BGS-DL25TN (or DL25TP) BGS-DL10N (or DL10P) BGS-DL30N (or DL30P) M8 connector type BGS-DL10TCN (or DL10TCP) BGS-DL25TCN (or DL25TCP) BGS-DL10CN (or DL10CP) BGS-DL30CN (or DL30CP) Sensing range 40-100mm 100-250mm 40-100mm 100-300mm Spot size 1mm / 80mm 2mm / 200mm 3mm / 80mm 6mm / 200mm Range adjustment Teach-in, with fine adjustment button 4-turn potentiometer Hysteresis 3% / 80mm 10% / 200mm 5% / 80mm 5% / 200mm Supply voltage DC10-30V including 10% ripple (P-P) Current consumption 40mA max (12V), 27mA max (24V) 35mA Response time 1.5msec 0.7msec Timer Off delay / On delay / One shot delay (1msec increment : 0-999msec, 1sec increment for 1-10 sec) N/A Light source Red Laser Diode 650nm, Max 1mW 300s, Class 2 Red Laser Diode 650nm, Max 2mW 6s, Class 2 Indicator Output indicator (orange), Laser emission (green) Digital indicator 7segment, 3digit Red LED N/A Control output NPN or PNP open collector DC30V 100mA max Operation mode Light / Dark On selectable Ambient temp/humid -10 to 40 / 35-85%RH -10 to 50 / 35-85%RH Insulation resistance 20M Ohm or more (at 500V DC) Protection category IP67 Noise resistance IEC, CE Shock resistance 50G (500m/S2) , XYZ 3 directions Environmental illuminance Sunlight : 10,000lux, Incandescent lamp : 3,000lux max Material Anti-bacterial ABS (housing), PMMA (lens)
	Remarks : (1) Scanning range with 100mm X 100mm gray 18% paper.   (2) Details of hysteresis by color/distance shall be referred in technical chart provided in this catalogue.
	DR-Q series
	Model Transparent type Type Accurate type Long distance type Cable type DR-Q150TN (or Q150TP) DR-Q400TN (or Q400TP) M8 connector type DR-Q150TCN (or Q150TCP) DR-Q400TCN (or Q400TCP) Sensing range 1.5meter 4meter Spot size 15mm / 1.5meter 20mm / 3.5meter Range adjustment Teach-in, with fine adjustment button Supply voltage DC10-30V including 10% ripple (P-P) Current consumption 35mA Response time 0.7msec Timer Off delay / On delay / One shot delay (1msec increment : 0-999msec, 1sec increment for 1-10 sec) Light source Red Laser Diode 650nm, Max 2mW 4s, Class 2 Indicator Output indicator (orange), Laser emission (green) Digital indicator 7segment, 3digit Red LED Control output NPN or PNP open collector DC30V 100mA max Operation mode Light / Dark On selectable Ambient temp/humid -10 to 50 / 35-95%RH Insulation resistance 20M Ohm or more (at 500V DC) Protection category IP67 Noise resistance IEC, CE Shock resistance 50G (500m/S2) , XYZ 3 directions Environmental illuminance Sunlight : 10,000lux, Incandescent lamp : 3,000lux max Material Anti-bacterial ABS (housing), PMMA (lens)
	Remarks : Scanning range taken with P250F reflector
	DT series / DR series
	Model Potentiometer adjustment type Type Through-Beam Retro reflection Cable type DT-4000N (or 4000P) DR-500N (or 500P) M8 connector type DT-4000CN (or 4000CP) DR-500CN (or 500CP) Sensing range 40 meter 5 meter Spot size 15mm / 5meter 20mm / 3.5meter Range adjustment 1-turn potentiometer Supply voltage DC10-30V including 10% ripple (P-P) Current consumption 40mA 30 mA Response time 0.5msec Light source Red Laser Diode 650nm, Max 2mW 4s, Class 2 Indicator Output indicator (orange), Laser emission (green) Digital indicator N/A Control output NPN or PNP open collector DC30V 100mA max Operation mode Light / Dark On switchable Ambient temp/humid -10 to 50 / 35-95%RH Insulation resistance 20M Ohm or more (at 500V DC) Protection category IP67 Noise resistance IEC, CE Shock resistance 50G (500m/S2) , XYZ 3 directions Environmental illuminance Sunlight : 10,000lux, Incandescent lamp : 3,000lux max Material Anti-bacterial ABS (housing), PMMA (lens)
	Remarks : Scanning range taken with P250F reflector