| |
| Type |
Standard |
Mark sensor |
Analogue |
| Stand-alone Type |
| IP50 type |
Cable type NPN / PNP |
D2RF-TN, or D2RF-TP |
D2GF-TN or D2GF-TP |
D2RF-TAN or D2RF-TAP |
| M8 QD 4pin, NPN / PNP |
D2RF-TCN4 or D2RF-TCP4 |
D2GF-TCN4 or D2GF-TCP4 |
NA |
| IP66 type |
Cable type NPN / PNP |
D2RF-2TN, or D2RF-2TP |
D2GF-2TN or D2GF-2TP |
D2RF-2TAN or D2RF-2TAP |
| M8 QD 4pin, NPN / PNP |
D2RF-2TCN4 or D2RF-2TCP4 |
D2GF-2TCN4 or D2GF-2TCP4 |
NA |
| M8 QD 3pin, NPN / PNP |
D2RF-2TCN3 or D2RF-2TCP3 |
D2GF-2TCN3 or D2GF-2TCP3 |
NA |
| Interconnection Type |
| Master unit |
Cable type NPN / PNP |
D2RF-TMN, or D2RF-TMP |
D2GF-TMN, or D2GF-TMP |
NA |
| M8 QD 4pin, NPN / PNP |
D2RF-TMCN4, or D2RF-TMCP4 |
D2GF-TMCN4, or D2GF-TMCP4 |
NA |
| Slave unit |
Cable type NPN / PNP |
D2RF-TSN, or D2RF-TSP |
D2GF-TSN, or D2GF-TSP |
NA |
| M8 QD 4pin, NPN / PNP |
D2RF-TSCN4, or D2RF-TSCP4 |
D2GF-TSCN4, or D2GF-TSCP4 |
NA |
| Light Source |
Red LED |
Green LED |
Red LED |
| Response Time |
60 micro sec (Fast mode ), 250 micro sec (standard), 2.0 ms (Long distance) |
| Auto Control System |
APC / ASC |
| LED Power Control |
3 steps ; 100%, 50% and 25% |
| Timer Functions |
On delay/Off delay /One shot, 1-9,999msec (1msec increment) |
| Sensitivity Adjustment |
Teach-in + fine adjustment |
| Output Indicator |
Output (orange) : 1CH / 2CH common |
Output (orange) |
| Digital Indicator |
7 segment LED, 4 digits in Red, 4 digits in Green |
| Teach-in Mode |
Full Power / One point / Two points / Full Automatic / Differential / Zone / Transparent |
| Control Output |
2CH, NPN or PNP open collector, DC30V, 100mA Max |
1CH, NPN or PNP |
| Analogue Output |
NA |
4-20mA |
| Parallel Installation |
Up to 16 sets |
| Crosstalk Prevention |
Up to 4 sets |
| Output Mode |
Light on / Dark on selectable |
| Sensing Mode |
Long Distance Mode, Standard, Fast mode, |
| Display |
Regular dislay plus ; bar, %, eco (off, run mode only) |
| External Input |
Teaching / Counter Reset |
| Supply Voltage |
DC 10-24V +/- 10% ripple |
| Current Consumption |
45mA Max (24V) |
| Circuit Protection |
Reverse Polarity, Overcurrent, Short circuit |
| Warmup Time |
100m sec |
| Ambient Temp/Humidity |
-25 to 55 C, 35 to 85% RH |
| Storage Temp/Humidity |
-40 to 70 C, 35 to 85% RH |
| Ambient Illumination |
Sunlight 10,000 lux, High Frequency Lamp 3,000 lux |
| Protection Category |
IEC, IP50 (except Stand-alone IP66 types) |
| Noise Resistance |
IEC, CE |
| Shock Resistance |
IEC 68, 50G |
|
Specifications
