Specifications
| Narrow spot type FDA CLASS II | CD5-30 | CD5-85 | |||
| Wide spot type FDA CLASS II | CD5-W30 | CD5-W85 | CD5-W350 | CD5-W500 | |
| Measuring Range | 30+/-5mm | 85+/-20mm | 350+/-100mm | 500+/-200mm | |
| Light Source | (Narrow spot type) | Red Semiconductor laser, 650nm, Max 1mW | |||
| (Wide spot type) | Red Semiconductor laser, 658nm, Max 1mW | ||||
| Spot size (*1) | (Narrow spot type) | 30 x 100μm | 70 x 290μm | ||
| (Wide spot type) | 260 x 1000μm | 260 x 1200μm | 700 x 2400μm | 1000 x 3700μm | |
| Linearity (*2) | ±0.08%F.S. (F.S.=10mm) | ±0.05%F.S. (F.S.=40mm) | ±0.08%F.S. (F.S.=200mm) | ±0.08%F.S. (F.S.=400mm) | |
| Resolution (*2) | 0.2μm | 1μm | 5μm | 10μm | |
| Sampling period (*3) | 100, 200, 400, 800, 1600, 3200μs | ||||
| Temperature Drift (*4) | ±0.01%F.S./ (F.S.=10mm) |
±0.01%F.S./(F.S.=40mm) |
±0.01%F.S./(F.S.=200mm) |
±0.01%F.S./(F.S.=400mm) |
|
| Serial I/F (*5) | RS-422 9.6k ~ 1843.2kbps | ||||
| Power Supply | DC12 ~ 24V ±10% or from CD5A-N/P Controller | ||||
| Power Consumption | Max. 45mA (DC24V) | ||||
| Indicator LED | (Laser) | Green = Laser is active | |||
| (Measurement) | Orange = Within ±5% of measurement distance center Red = Near side within measurement range Green = Far side within measurement range Red/Green alternately = Out of measurement range |
||||
| Protection Category | IP67 | ||||
| Operating Temperature / Humidity | -10 to 50 35 to 85% RH (without condensing) |
||||
| Storage Temperature / Humidity | -20 to 60 35 to 85% RH (without condensing) |
||||
| Ambient illuminance | Incandescent Lamp = Max. 3,000 lux (incandescent lamp) | ||||
| Vibration Resistance | 10 to 55 Hz / 1.5mm for XYZ 2hours | ||||
| Shock Resistance | 50G (500m/s2) XYZ 3times | ||||
| Cable | Extendible up to 50m by extension cable | ||||
| Extension cable | DSL-1212-G02M (2m), DSL-1212-G05M (5m) | ||||
| Material | Case: Aluminum diecast | ||||
| Weight | Approx. 250g including 500mm cable | ||||
| Condition for this specification: Temperature: 23 ,
Power supply: 24VDC, Sampling period: 100μs (CD5-W350/-W500/-W2000: 800μs)No. of averaging times: 256, Target object: Aluminum vapor deposition Mirror (specular type), White ceramic (diffuse type) |
| *1 | Defined at center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. |
| *2 | No. of averaging times: 4096 |
| *3 | Default: CD5-(W)30/-(W)85: 100μs, CD5-W350/-W500: 800μs |
| *4 | Typical data |
| *5 | Without controller. Default setting is 9.6kbps, Following is I/F speed without any missing data. 100μs: 921.6kbps, 200μs: 460.8kbps, 400μs: 230.4kbps, 800μs: 115.2kbps, 1600μs: 57.6kbps, 3200μs: 38.4kbps |
| Product Type | CD5-L25 | CD5-LW25 | |
| Measuring Range | 25+/-1mm | ||
| Light Source | FDA CLASS II Red Semiconductor laser 650nm, Max 0.39mW | ||
| Spot Size (*1) | 25 x 35μm | 100 x 700μm | |
| Linearity (*2) | ±0.08%F.S. (F.S.=2mm) | ||
| Resolution (*2) | 0.02μm | ||
| Sampling period (*3) | 100, 200, 400, 800, 1600, 3200μs | ||
| Temperature Drift (*4) | ±0.01% F.S./ (F.S.=2mm) |
±0.05% F.S./ (F.S.=2mm) |
|
| Serial I/F (*5) | RS-422 9.6k ~ 1843.2kbps | ||
| Power Supply | DC12 ~ 24V ±10% or from CD5A-N/P Controller | ||
| Power Consumption | Max. 45mA (DC24V) | ||
| Indicator LED | (Laser) | Green = Laser is active | |
| (Measurement) | Orange = Within ±5% of measurement distance center Red = Near side within measurement range Green = Far side within measurement range Red/Green alternately = Out of measurement range |
||
| Protection Category | IP67 | ||
| Operating Temperature / Humidity | -10 to 50 35 to 85% RH (without condensing) |
||
| Storage Temperature / Humidity | -20 to 60 35 to 85% RH (without condensing) |
||
| Ambient illuminance | Incandescent Lamp = Max. 3,000 lux (incandescent lamp) | ||
| Vibration Resistance | 10 to 55 Hz / 1.5mm for XYZ 2hours | ||
| Shock Resistance | 50G (500m/s2) XYZ 3times | ||
| Cable | Extendible up to 50m by extension cable | ||
| Extension cable | DSL-1212-G02M (2m), DSL-1212-G05M (5m) | ||
| Material | Case: Aluminum diecast | ||
| Weight | Approx. 250g including 500mm cable | ||
| Condition for this specification: Temperature: 23 ,
Power supply: 24VDCNo. of averaging times: 256, Target object: Aluminum vapor deposition Mirror (specular type) |
| *1 | Defined at center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. |
| *2 | No. of averaging times: 4096 |
| *3 | Default: 100μs |
| *4 | Typical data |
| *5 | Without controller. Default setting is 9.6kbps, Following is I/F speed without any missing data. 100μs: 921.6kbps, 200μs: 460.8kbps, 400μs: 230.4kbps, 800μs: 115.2kbps, 1600μs: 57.6kbps, 3200μs: 38.4kbps |
| Product Type | CD5-W2000 | |
| Measuring Range | 2000+/-500mm | |
| Light Source | FDA CLASS IIIa Red Semiconductor laser 658nm, Max 5mW | |
| Spot Size (*1) | 2100 x 7800μm | |
| Linearity (*2) | ±0.1%F.S. (F.S.=1000mm) | |
| Resolution (*2) | 30μm | |
| Sampling period (*3) | 100, 200, 400, 800, 1600, 3200μs | |
| Temperature Drift (*4) | ±0.05% F.S./ (F.S.=1000mm) |
|
| Serial I/F (*5) | RS-422 9.6k ~ 1843.2kbps | |
| Power Supply | DC12 ~ 24V ±10% or from CD5A-N/P Controller | |
| Power Consumption | Max. 45mA (DC24V) | |
| Indicator LED | (Laser) | Green = Laser is active |
| (Measurement) | Orange = Within ±5% of measurement distance center Red = Near side within measurement range Green = Far side within measurement range Red/Green alternately = Out of measurement range |
|
| Protection Category | IP67 | |
| Operating Temperature / Humidity | -10 to 50 35 to 85% RH (without condensing) |
|
| Storage Temperature / Humidity | -20 to 60 35 to 85% RH (without condensing) |
|
| Ambient illuminance | Incandescent Lamp = Max. 3,000 lux (incandescent lamp) | |
| Vibration Resistance | 10 to 55 Hz / 1.5mm for XYZ 2hours | |
| Shock Resistance | 50G (500m/s2) XYZ 3times | |
| Cable | Extendible up to 50m by extension cable | |
| Extension cable | DSL-1212-G02M (2m), DSL-1212-G05M (5m) | |
| Material | Case: Aluminum diecast | |
| Weight | Approx. 450g including 500mm cable | |
| Condition for this specification: Temperature: 23 ,
Power supply: 24VDC, Sampling period: 800μsNo. of averaging times: 256, Target object: White ceramic (diffuse type) |
| *1 | Defined at center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. |
| *2 | No. of averaging times: 4096 |
| *3 | Default: 800μs |
| *4 | Typical data |
| *5 | Without controller. Default setting is 9.6kbps, Following is I/F speed without any missing data. 100μs: 921.6kbps, 200μs: 460.8kbps, 400μs: 230.4kbps, 800μs: 115.2kbps, 1600μs: 57.6kbps, 3200μs: 38.4kbps |
| Model | CD5A-N (NPN output type) | CD5A-P (PNP output type) |
| Number of connectable sensor heads | Max. 3 | |
| Power Supply | DC 12 to 24V ±10% | |
| Power consumption | 350 mA/24V | |
| Temperature drift | ±0.01% F.S./ |
|
| Interface | RS-232C/USB | |
| Analog output | Voltage output: ±10V/F.S. (output impedance 100 Ω), Current output: 4 to 20 mA/F.S. (Load impedance 300 Ω) | |
| Alarm output | NPN/PNP open collector, Max.100mA/DC24V (Residual Voltage: Max.1.8V), ON when the controller had problem | |
| Control output | NPN/PNP open collector, Max.100mA/DC24V (Residual Voltage: Max.1.8V) | |
| Bank input | ON when connected to GND, 16 banks are selectable | |
| Hold input | ON when connected to GND | |
| Zero reset input | ON when connected to GND, Measurement value and calculated result can be reset | |
| Laser OFF input | ON when connected to GND | |
| Display | 4.3" TFT LCD display | |
| Protection category | IP20 | |
| Operating Temperature / Humidity | -10 to 45 35 to 85% RH (without condensing) |
|
| Storage Temperature / Humidity | -20 to 60 35 to 85% RH (without condensing) |
|
| Vibration resistance | 10 to 55 Hz / 1.5mm, XYZ 2hours | |
| Shock resistance | 20G (196m/s2) XYZ 3times | |
| Material | Case: Polycarbonate, Connection terminals: Nylon 66 | |
| Weight | 550g including connection terminals | |
