Specifications
	Specifications for each measurement range
	Model Cable type 2 control output + Analog 4-20mA CD33-30NA/PA CD33-50NA/PA CD33-85NA/PA CD33-120NA/PA 2 control output + Analog 0-10V CD33-30NV/PV CD33-50NV/PV CD33-85NV/PV CD33-120NV/PV 2 control output CD33-30N/P CD33-50N/P CD33-85N/P CD33-120N/P 1 control output + RS422 I/F CD33-30N-422/P-422 CD33-50N-422/P-422 CD33-85N-422/P-422 CD33-120N-422/P-422 Connector type 2 control output + Analog 4-20mA CD33-30CNA/CPA CD33-50CNA/CPA CD33-85CNA/CPA CD33-120CNA/CPA 2 control output + Analog 0-10V CD33-30CNV/CPV CD33-50CNV/CPV CD33-85CNV/CPV CD33-120CNV/CPV 2 control output CD33-30CN/CP CD33-50CN/CP CD33-85CN/CP CD33-120CN/CP 1 control output + RS422 I/F CD33-30CN-422/CP-422 CD33-50CN-422/CP-422 CD33-85CN-422/CP-422 CD33-120CN-422/CP-422 Control output N: NPN open collector, P: PNP open collector Measuring Range (Full Scale) 30±4mm (8mm) 50±10mm (20mm) 85±20mm (40mm) 120±60mm (120mm) Light Source Red Semiconductor laser, 650nm, Max 1mW, FDA CLASS II Spot size (*1) Near 0.15 x 0.15 mm 0.6 x 1.2 mm 0.9 x 1.5 mm 1.2 x 1.8 mm Middle 0.1 x 0.1 mm 0.5 x 1.0 mm 0.75 x 1.25 mm 1.0 x 1.5 mm Far 0.15 x 0.15 mm 0.4 x 0.9 mm 0.6 x 1.0 mm 0.5 x 0.8 mm Linearity (*2) ±0.1%F.S. Resolution (*3) Fast 4μm 8μm 15μm 45μm Other 2μm 5μm 10μm 30μm Temperature Drift ±0.08%F.S./ Response time Fast 1ms + Time for selecting sensitivity (averaging: 1) Standard 8.5ms + Time for selecting sensitivity (averaging: 16) High Resolution 32.5ms + Time for selecting sensitivity (averaging: 64) Time for selecting sensitivity 4ms max. Indicator LED Distance Indicator Bar Graph LED Output Indicator ON status : Orange Protection Category IP67 Operating Temperature / Humidity -10 to 45 35 to 85% RH (without condensing) Storage Temperature / Humidity -20 to 60 35 to 85% RH (without condensing) Ambient illuminance Incandescent Lamp = Max. 3,000 lux (incandescent lamp) Vibration Resistance 10 to 55 Hz / 1.5mm for XYZ 2hours Shock Resistance 50G (500m/s2) XYZ 3times Material Case: PBT, Front window: PMMA Weight Cable type Approx. 65g excluding cable Connector type Approx. 70g
	*1  Typical value. Defined at center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. *2  No. of averaging times: 64 (High resolution) , Object : White ceramic *3  Middle of measuring range. Object : White ceramic
	Specifications for each output type
	Type 2 Control output + Analog 4-20mA + Analog 0-10V 1 Control output + RS422 Supply Voltage DC12-24V (-5%, +10%) DC18-24V (-5%, +10%) DC12-24V (-5%, +10%) Current Consumption max. 75mA (DC24V) max. 80mA (DC24V) including analog output max. 75mA (DC24V) Output Control output 1 NPN/PNP open collector 100mA max./30VDC (residual voltage max. 1.8V) Control output 2 NPN/PNP open collector 100mA max./30VDC (residual voltage max. 1.8V) Analog output 4-20mA 0-10V Interface RS422 Cable type Dia: 5mm 5core 2m AWG24 (PVC) Dia: 5mm 6core 2m AWG24 (PVC) Dia: 5mm 8core 2m AWG24 (PVC) Connector type M12 8pin